Product comes well-shipped and reinforced well!!! Biggest problem I had was with the instructions. Like most ppl, I opened the manual to check that all the parts were present and accounted for. All the parts come in a sealed box, and then are bagged and lettered. However screws J and plate C are already pre-assembled because plate C is actually the sidewall of the toolbox which are held in by screws J, but the instructions do not explain this unless you read all the assembly steps. The downside is the manual provides no help line at all only an email, and Walmart can't seem to speak Chinese, so they only wanted to issue a refund. After I finally read all the instructions, I figured out that J and C were already on the toolbox. Otherwise, the toolbox looks appealing in black. However, the lower lock doesn't necessarily keep the items inside safely since you can unscrew the side wall and easily access the interior of the lower box. To avoid this, one would need to solder the screws so they aren't able to be unscrewed. It's a nice toolbox, but not necessarily secure. The top locks, as well but you must place lock bars through the top compartment slats so that the lower drawers do not open. This would be a mild aggravation compared to toolboxes that actually lock all the drawers with the turning of the key. But, you get what you pay for. If you are looking for a nice-looking, low budget box, this might fill the bill. Don't expect.much in the way of customer service or parts replacement from this supplier. However, they do provide an email. The powder black finish seems good from the get go, but only time will tell how it holds up. Also, not sure if the side hangers are useful or just fluff for hanging tools like screwdrivers, etc. Oh yeah, you have to wildly rotate the wheels clockwise to install them. It works, but be patient. A few hundred rotations will get them fully threaded.