A4 Paper Cutter 12 inch Titanium Straight Paper Trimmer, Paper Slicer Scrapbooking Tool with Automatic Security Safeguard and Side Ruler for A4, Craft Paper, Label, Photo and Cardstock - GREEN

It's ok for what it costs. Not recommended for heavy use. It cuts up to 3 sheets unless you put a lot of pressure on the blade.

Love this! Makes it so easy to cut straight now!

I used this on card stock and it worked like a dream! Very cost effective

Very easy to use and very precise

Value. Edge misses cut occasionally

I've used this for years as a classroom teacher and it works great. I had to buy a new one because I dropped my older one from the top of a cabinet. It was at least 7 years old.

Good item. Does it's job. Just wish it was a little more sturdy and not soo much lightweight. But for the price it's great.

I noted that 'yes' I would recommend this cutter, but for me to do that, I'd also tell you about its weak points and there are a few. First off, it's a nice, downsized cutter, it has the typical measurements for home projects, uses the traditional layout and measuring scales on the board. However there is one weak point of manufacture which unfortunately the actual cutter slide, blade channel. The slide itself when in position to cut at the desired poinnt, if pressed even a bit too hard, causes the slide to splay, which then causes a literal crooked cut. And there isn't anyway around that due to the need to 'lock' down the item to be cut. It needs to be stationary and the only way to achieve that is to press down with the plastic slide. Next we move to the cutting channel. The channel is sturdy, it is in line with the cutting blade, however and for what ever the reason, the channel tends to fill up with paper scrap, causing it to impede the cutter from having a straight unobstructed run. The USer then must stop, and periodically clean out the channel to keep it free of debris. And the last design problem, the actual cutting blade itself. The cutter only comes with a single cutting blade, the days of such a blade lasting forever are gone. In just 2 weeks of moderate use, I had to order a new blade which I could only order in volume. I bought a pack of (9). They did come fairly soon after ordering, but the very first blade I used as a replacement bent on its very first run. I then had to replace that blade. These blades aren't the old style, solid design cutting blade. Now the blade is embedded into the plastic blade holder with just a very small edge jutting out to cut paper. Yes it is sharp, be very careful using it, butit hasn't any elastic strength and once bent the User has no way to reshape it. For once in a while, thin cutting projects, it works.

It's a decent budget option. I do have issues sometimes with the blade ripping the paper rather than cutting.

It's pretty lightweight but not flimsy. The blade is pretty sharp. Little bit hard for me to tell where it's gonna cut but that might be just a learning curve for me. Wish it had a safety lock. Not bad for the price I paid