ANDELI 135A MIG Welder, 110V 3-in-1 Multi-Process Welding Machine,Synergy Control,Gasless Flux Core Welder MIG,Stick, Lift TIG

seems to be good quality, I appreciate that the wire feed gun is detachable for storage. side access door makes spool changes very convenient.and color coded pos/neg is a nice plus, one of my welders has them reversed, pos on left neg on right no color coding, easy to mistake them, this is so much better

Okay I am no expert at welding I got this welder to repair my lawnmower deck. I'm very surprised at how easy it is to setup and get welding. I have welded a little in the past but not much. The welder came with everything you need (except the helmet) the weld in the pictures was my 1st weld with this welder and I was very impressed with how easy it was to use I just set the amps and it worked perfectly the only issue I found was that the cables are a little shorter than I would've liked but being so small and light it's easy enough to bring the welder closer to the job. I would highly recommend it for any beginner that has little to no experience with welding because of how easy it is to set up and weld

Pretty nice lil machine. Comes with everything pictured. I didn't expect a spool of wire but hey bonus. This doesn't feel cheap at all. The mig gun seems good for the value the contact for stick seems pretty good but the ground clamp will probably be upgraded as expected. Can't beat the value though. LED display is crisp and clear and all of the controls feel nice and not clunky. Upon turning it on the fan cuts on and seems to definitely do its job at moving air. I don't think over heating will be an issue for what it will be used for. Like i said for the price this thing I pretty dang awesome. Uses a 110v plug but I think it can be converted to 220v. Not sure. Make sure to read your operation manual and instructions to be safe. I would definitely recommend this for small jobs around the garage or making around the property with my generator in the back of the side by side. Highly recommended.

Had a few hiccups getting this item, but the customer service was awesome! it's a great little welder. oh , my started it up because it was dark when I got it. it seems to have everything I need. great packaging. if you're looking for a welder , get this one!

Finally, a compact but powerful MIG welder that really works. Gas Flux Core, MIG, Stick, and Lift TIG, this machine will do it all. Great for small projects around the house, shop and farm. Digital display and an automatic mode make it easy to use. Mild steel up to 1/8 inch thick is the recommended max. We use these around the farm to make small repairs in remote locations. It comes with everything you need to get started. Great for new welders to learn with.

It's lightweight, handles three types of welding, and is perfect for home use. Though I've only done some light testing so far, I'm blown away by how much power is packed into such a small, portable machine.

Works surprisingly well for a $90 machine. Came with a spool of .030 wire ($20 ). Initially w/n feed due to bad solder joint in the plug. Easy to fix. It ain't a Miller, but it'll get the job done.

very nice little welder, haven't used it yet but I'm very impressed with the quality of the build and accessories

Absolutely love this welder. it can do anything any. other welder can do if recommend to anyone.

The Andeli 135A Flux Core MIG Welder arrived double boxed and literally dropped on my front porch with a loud thud. On one side of the box a hole pushed through the cardboard and through the internal box as well. Nothing appears to have been damaged but this shows very little concern for package handling at a minimum. Inside the inner box, the welder protected on top and underneath by soft foam, with the ground clamp and stick welding stinger loose and the whip in its own zip lock style bag. The manual in its own plastic bag and an 0.8mm tip (for .030 wire) another 0.8mm tip is preinstalled on the Whip, and a very thin generic shoulder strap. The power cord is 3 feet 11 inches long. The Ground clamp is cheap metal with zero copper contact area and the cable measures 4 feet 9 inches. The Stick welding Stinger is mostly plastic with copper plated grooved plate for holding electrodes and the cable measures 4 feet 6 inches in length. The MIG (Flux core) Whip is fairly light duty and grinds when installed into the welder. From gun to connector it measures 5 feet 7 inches in length. The welder itself feels solid though it does rock slightly on a flat surface due to the uneven alignment of the front and rear plastic facia which also serves as feet for the unit. Fitment overall is ok, but there are screws under the facia instead of through it on the right hand side causing the plastic to bow outwards in those spots. The included spool of 0.8mm (0.030) flux core wire contains .45kg or not quite 1 pound of wire on a 4 inch spool. The unit will not accept larger 10 inch spools so the unit is limited to 2 pounds of wire max. The feed wheel supports 0.8 and 0.9mm wire, but with only 0.8mm tips you're limited to 0.8mm or .030 wire placing this unit squarely in the light duty, home or DIY use category. The tips are the TWECO style and available in both 030 and 035 sizes, but that is a separate purchase. Also a separate purchase, though shown as being included with the welder is a spare feed wheel. After using the welder, I found my initial impression of the ground cable and stinger(electrode holder) were not only correct but generous. After just a few minutes using the flux core whip, the ground clamp literally broke off from the clamp end. The cable was not hot and was not twisted in any way but it snapped off like it had somewhere else to be. Thankfully, the ground clamps for my other welders fit and surprisingly, coming from much cheaper welders, are miles better cables. Having this happen, I decided to check out the construction of the stinger (electrode holder). Like the ground, the wire is substandard and strands are loose and not under the wire clamp. I didn't bother testing the stick welding function on this welder as that cable is not to be trusted. Both will have to be replaced! I emailed Andeli so hopefully they'll make good on the cables. As a flux core welder, this is a usable welder, assuming you have good cables, but because of the cables, I can