BAKFlip 448504 MX4 (GEN 3) Hard Folding Tonneau Cover Fits 2004-2015 Nissan Titan 6'7" Bed

The BakFlip is a premium quality cover. I had one on a 19 Frontier and it was great. About 98% dry. I put a Gator folding cover on a 25 GMC Sierra 1500. That truck got totalled at 903 miles. I installed the Bakflip on my replacement 25 GMC Sierra 1500 last week. I prefer the matte finish on the BakFlip compared to the shiny satin finish on the Gator. Both covers required a little "tweaking" to get the latches to catch just right, The Gator design preferred that I close the tailgate with the top open. The BakFlip design works well both ways. That is I can close the tailgate with the cover open or closed. The BakFlip permits the whole folded cover to be flipped up to lean against the truck cab. This is necessary when hauling items like a motorcycle for example. In contrast the Gator cover must be removed since it does not flip up against the cab. In the past 3 months I have purchased both folding tonneau covers and installed them on identical 25 GMC 1500 Sierra pickups. While the BakFlip cost nearly twice as much, I would pay the greater amount again to have the advantages the BakFlip offers over the Gator and the Matte finish compliments my trucks trim better the the shiny satin Gator finish. For budget conscious folks the Gator is a good quality option that frankly is a better bang for the buck buy than the BakFlip. But it all comes down to preferences. The Gator was about 95% water tight. I cannot comment on the BakFlip since I've seen no rain since installation.

I went from a ARE fiberglass lid to this. . . Which limits you extremely. . The MX4 cover looks really good. . . . Easy install. . locks with tailgate. . Was missing one screw for the buckle latch, no biggie. . . never throw out extra hardware from any install!! Overall happy with product

I needed a new cover for my new Denali pickup. I shopped many other brands and watched many videos on other covers. I decided to buy the the BAKFlip MX4 cover. I watch videos on how to install it and it installed pretty easy. Took me about an hour and a half because I am so particular. I love the way the cover looks. I also like how it folds. It locks down each section. You can also fold it up against the window to give you all the bedspace. I am very happy with my purchase.

I really tried my best with help to make the side rail square with bed sides. The foam strip seems to put the rail at an angle. I loosened/tighted the rails to no avail. The cover does leak but not excessively but it leaks. Any advice would be appreciated. S.

My only "problem" which it wasn't for my nephew was the pre-drilling of the hole in the plastic lip of the top body cover. A guide that would not require the clip be in place would have made this installation a bit easier for an old guy with kneeling issues like me. My nephew handled it with ease.

I just installed my cover and it looks great. It was a very easy installation. The only part about the cover I dislike is once I put the cover on and looked around the whole thing the spots where it folds were a little torn up. Being brand new that shouldn't be like that.

I tried to communicate this with Realtruck, but there was too much red tape to make it worthwhile. There is a MAJOR issue with the written instructions that come with the cover that I purchased. No where in the instructions does it say that the clamps that hold the rail onto the bed should snap into the rail. If you don't snap them into the rail then the whole thing does not work at all. It will not latch and close up. I had to search Youtube in order to find this.

This cover does not align properly for all latches to click into place with out manually pressing up on the rails and down on the cover at the same time. It requires modification to the bed of a 2025 tundra for the drain hose to fit. It also leaks significantly from the corners closest to the cab which causes water to puddle where the drain hose goes through the bed. The water will not drain from the bed because the hose occupies the drain holes. I had a gator cover and never had these issues. I have reached out to Real Truck and BAK for support but was told by BAK that I had to go through Real Truck but website says same company. Real Truck is unresponsive.

I had a 2017 Ridgeline and loved the Bakflip. Purchased 2025 Ridgeline and a new Bakflip and could not get it mounted - rails are not as sturdy and I found others online with similar issues. Went back and mounted the 2017 Bakflip onto the 2025 Ridgeline and it was simple and easy. RealTruck really needs to look at the design of the rail systems.

I set a tire on top and drove around the building, which is about 200 yards and that's a big circular scratch on it. I didn't realize I was buying something with such a soft surface where I wouldn't have. Truck denied my request to return it even though they have the monopoly the industry. I'm not impressed.