BedRug BRC99SBK Classic Bed Liner

This is the second bedrug i had in 11 years. I just swapped them out. I still have the other one that I put on top of the new 1. If I'm going to like haul rock or something, it protects that brand new liner. And then the old liner is still a 100% usable as well. Product, please do not discontinue this very good product. Thank you very much. I really appreciate your product.

This was pretty easy to install. The cutouts for tie downs were accurate. The guides for the lights, power box and storage box were close, but take time to start with a smaller hole and expand to get the fit you want. I have bed rails and the bed rug went to the bottom of the rails. I did not need to remove or loosen the rails. Velcro tape is strong. The rug provides great texture and is tough.

I put a pop up camper on my truck and this thing looks and feels great in it. It fills in the grooves and makes a soft surface to crawl and stand on. The carpet and foam nature adds a bit of insulation to the truck bed too, and with a tailgate seal added in and plugging what holes I could, I think this thing seals pretty well and insulates to keep us warmer on cold nights!

The Bed Rug has great look and fit in my new Maverick! It insulates and cuts down on noise, too! Our big German Shepard loves it too! Easy install, just make sure the metal surfaces are clean so that the adhesive on the hook and loop tape can adhere properly.

I have owned a bed rug since the first week of buying a brand new Silverado in 2003. I still have the truck and the bed rug is still in good shape. I have hauled Deer, wood, mulch, and anything else my wife would throw in the bed of the truck, it was very easy to clean. So naturally when I purchased a new 2025 Silverado, I couldn't wait to install a bed rug in my new truck. It was easy to install and really looks great.

The bed rug bedliner works great and fits great. Only had to make small modifications for my 2022 tundra because there are lights inside of the bed and an inverter 120 V plug so you do have to cut holes out for those but not very hard to do at all. For the 120 V plug I removed the plug cut the hole and then reinstalled the plug over the top of the bedliner , as to pinch the bed liner between the molded plug and the truck gives it a very professional install. The bedliner was also a little tall to fit underneath the real system tiedown system in the truck that was factory. So I removed the rail system, installed the rug and then reinstalled the rail system over the top of the bed rug to hold that in place as well. The only hard part was finding the holes for each bolt. All in all, it looks very professional, but it did take a little longer to do.

This is my second bed rug on different trucks. Last one was just the bottom of the bed this one has the sides which will be great for camping. Fits great. As noted in the directions, some of the preidentified cut areas for bed lights etc are not exact so make sure before you cut.

Th Bed Rug is very good & arrived with no shipping damage. However, your website verified that it fit my truck which it did, but I had to custom cut the bedrug to fit around 2 bed Lights, 2 bed rails which dad to come off, & be reinstalled, plus the 120VAC utility outlet panel. This should be stated in your product website. Thanks. . . . . Brian K.

I did not like the lack of Velcro strips sewn into bulkhead. The Velcro hook pieces attached to the bulkhead fabric poorly. I used my own Velcro, with smaller hooks. You tube video shows earlier versions with three Velcro loop strips sewn into back of bulkhead fabric. If it's not broken don't fix it.

Thought the customer service was good so went ahead an bought the bed liner. It clearly says no modifications required, when I went to install all of the tie downs, bed lights and accessories were covered by the rug. Sent some follow up questions regarding the liner. . . 3 days now, no response. Look somewhere else before you purchase here.