BLACK+DECKER 6.0 Amp 1/2-Inch Corded Vsr Hammer Drill, DR670

A good basic drill. Very flexible having both Hammer Drill and regualr drill capability. Not intended for commercial use, but it's a very affordable decent grade tool for the average handyman. The full 1/2" chuck is nice!

I needed this tool for a single purpose job of properly installing a flagpole mount into the mortar of my brick front home. It is both a regular drill and hammer drill which is perfect for concrete and masonry. I shopped around and this was by far the most reasonably priced hammer drill I found. Good quality and did the job with no problem. The chuck is a little complicated so make sure you read the manual as it has a lock unlock button that must be activated to tighten and remove the drill bits

I had it 4 years ago.for my home and it worked well in concrete brike wood and metal A little heavy maybe

Needed one for home use and have had / used this brand for many years with good luck and they have lasted a long time. Need to drill in cement / brick sometimes and is handy to have one like this.

this is a strong little drill it goes through cement with no problem . it take big bits an is light enough to hold over head and drill

This is a straight forward quality for price product. Well worth the price paid.

This is a light duty hammer drill, it worked good for drilling 4 holes in garage floor, it probably would not last in steady use. I would recommend this for home use.

tried it and like it need to read the instruction on how for to put the drill bit in to tighten it so it gets tight

The chuck is an issue. I bought this in a pinch without looking at other options. The chuck will loosen.

Bought this to mix floor leveler, started smoking within 3 minutes. A half inch corded drill should be able to handle this.