BlackMagic Select Automotive Window Tint Film, 35% VLT

don't cut too much of the excess on both sides of the glass. it will rub when the glass goes up and down. if there are wrinkles on the bottom edge of the glass. wait 24 hours and it will shrink by itself. don't rush to remove it when you encounter those wrinkles

The Black Magic Select Window Tint Film was easy to apply. The only problem I had which took some time and patience was separating the clear film from the tint to apply it. It did not wrinkle, tear, or crease easily as I was applying it. It went on nice and stayed on the window. This product contains the film only and to apply will need the following: a spray bottle filled with clear liquid dish soap mixture, soft rubber squeegee, razor blade knife, and a lint free towel. I cleaned the window first with a non-ammonia window cleaner and wiped dry with a lint free towel to have a clean surface before applying the tint film. 35% VLT allows 35% of the light in whereas 5% VLT allows 5% of the light in. This roll was 2 x 6.5 feet (24" x 78") enough for a mid-size car's two front & triangle windows. It did reduce the incoming heat and didn't notice any glare while driving. At night it was still easy to see through. I liked the product so much that I am thinking of installing 5% VLT for the rear windows. Overall, I am very pleased with this product.

Ladies get some tape, not a big piece but just enough to be caught into and then you're gonna put it on either side and then pull it apart and that way you'll see where the clear piece is and from there just cut out and attach it. it's really easy. My other advice is to not do it in when the areas it's easier to crease and crease will leave bubbles on the tint. Mine isn't A1, but it'll do and keep the sun off me.

I used to sit on a window in our bedrooms. That get direct sunlight. Was pretty easy to put on and works really well.

what a pain in the butt to put on. then if you try to fix it, it just rips. didn't stay well but if you know better might work for you

Meh film, was frustrating to work with - would stick to the window when it wasn't supposed to - fully flooded with water before squeegeeing it out. Then once I had it placed after fighting it, and squeegeed it out, then it wouldn't stick in some places. I ended up just ripping it off and will have to pay someone to tint the windows. Wasn't a hard window either - Jeep front windows - mostly flat. Live and learn, spend more money on better tint material I guess.

All 4 boxes was crushed when delivered. Walmart employees did not package the items. They were not wrapped at all. When delivered FedEx delivered them they were completely crushed. Could not use. Having a hard time getting a refund. I will not be ordering from Walmart again.

This was the second time I ordered this tint the first time I never got it so I went in and did a refund . But yet I went back a week later and reordered it I got it this time but the box was destroyed it looked as if it had been open taped back up and stepped on . I still have it never open it I was wanting for the person who is going to do the install to take it from the box to make sure the product is not damaged!!! I was very disappointed with the way it looked when I got it. Y'all got to do better !!!!!I need a refund for my trouble. 2 times I ordered this item!!!!

I ordered some of the 35% reflective film black magic brand for five dollars and free shipping. The wrong item was sent. I did get a refund on my credit card or it's pending, but I would like to get the window film for the same price as advertised five dollars and free shipping shipping.

Awful with no solution from walmart or vendor. Box arrived crushed in several spots wkth clear tape on each end. They wont send out replacement and giving hard time and a ton of back n forth regarding refund amd yet nothing happened