Dremel US20V-02 - Compact Circular Saw Kit with 2 20V Batteries, Charger & Storage Bag, Cordless Compact Saw, Ideal for Flush Cutting, Plunge Cutting and Surface Preparation

It works well for many different projects. I like the old attachments that stuck out farther so they were above the guard and I had an idea. They should make one that is above the guard that you can put Velcro sanding pads on. It's a great saw regardless and I'd recommend it.

[This review was collected as part of a promotion.] I love this saw. As a woodworker I have many saws but the Dremel Ultra saw is a favorite. Useful making quick cuts on plywood or hardwood where larger saws do not fit. The motor has plenty of power and because it's cordless I can use anywhere without a cord.

Purchased to assist in the installation of 7 flush wood flooor vents. Very maneuverable, even close to the wall. Ultra clean cut with good visibility to follow trace line. Only recommendation would be to obtain additional battery, so always one charged.

i have had my saw for a couple of years and used it for mostly small projects. i was happy with its performance. i recently bought a house that needed a new kitchen floor. in the mess of moving, the only saw i could find was my Dremel 20. i was installing floating cork and there were a number of cuts to be made. Using the stock wood blade, the saw performed flawlessly. I really thought the cork would be tough on the edge, but the unique carbide design cut as well at the end as it did in the beginning.

[This review was collected as part of a promotion.] I'll be completely honest. I didn't really think I'd get much use out of this saw. I have a full sized table saw and a few circular saws so I figured that I had everything covered. But there I was putting wood paneling into a shed to use as a small office (working from home isn't awesome) and I pulled the Dremel Ultra Saw out because it's battery powered and it was late in the day and I needed to get things done. I was blown away with how easy it was to cut everything I threw at it. This is a cool little tool and I've used it many times since then. Dremel has provided me this product in exchange for an honest review.

[This review was collected as part of a promotion.] Received it a few weeks ago, and it has the power to cut what I need. It's 20v and runs like it's bigger. I've managed to cut everything I've tested with it, wood, plywood, a few tiles, some PVC tubes and a wire shelf unit. I love that it has a case, makes storage much easier. Dremel has provided me this product in exchange for an honest review.

A Great Lightweight Saw! This saw only weighs 4.6 pounds including the battery and blade. It is well designed and constructed with quality materials. The shape of the saw and the distribution of weight makes it easy to hold and control. The area you grip uses a molded plastic that is both a soft and non-slip finish. The motor is powerful and I had no problem cutting 1/2" cement board with it. I also had no difficulties cutting 3/4" copper pipe and 1/4" plywood. I also especially liked the inclusion of a vacuum cleaner port. It worked really well at keeping the worksite clean. Saw depth of cut is only 3/4" so its for cutting smaller items. Also the battery does not last through a lot of cutting, but it only takes 1 hour to charge. See Video.

[This review was collected as part of a promotion.] Dremel has provided me this product in exchange for an honest review. Saw kooks well built and sturdy. It has many faults though. Very short battery life. Had to recharge after 2 36" cuts in 3/4" plywood. It kicks back a lot. I was replacing a sub floor and bought the edge cutting blade to clean up along the walls. Saw could not complete the task ended up using a Multi saw. I cut well in 3/8th ply. I haven't tried it in hardwood ply or metal. I feel it might be well suited for someone who was doing crafts. Was not suited for the things I used it for.

I purchased the saw a few weeks ago and it does not work as well as I expected, I have used the saw for cutting thin plywood, about a half inch and it continued to catch up and bind way to easy, short life time on the battery was noted as well, I would suggest getting a second battery and limiting this saw to use on trim only.

[This review was collected as part of a promotion.] The weather finally warmed up enough here in North Dakota for me to get outside and try out my US20v-01 cordless ultra-saw. I did not have an ongoing project so I tested it by cutting five different types of materials from my scrap bin. I used the US500 wood cutting blade to cut cedar wooden stakes, PVC pipe and 3/4" ply-wood using the edge guide. I also used the US510 metal cutting blade to cut copper pipe and a bronze color steel rod. The saw cut all of the materials with ease. There was plenty of power and no binding or stalling. I have not used the US540 diamond tile blade yet, but I expect it will also cut extremely well. Unfortunately, the securing of the edge guide with a small square nut and set-screw is a design failure. They slide in from the bottom and are not permanently attached. They will fall out and be lost if tightness is not checked often. I believe the edge guide should have been secured from the top with a permanently installed thumb screw or lever type knob similar to the one used for the depth adjustment lever. Also, the area of the aluminum base which holds the square nut in place is too small and thin. It cracked while I was adjusting the edge guide. The edge guide can no longer be secured in place. With the exception of the edge guide…this saw is very straight forward and works great. The battery fully charges in less than an hour. It includes a good assortment of attachments and blades. It has plenty of power and its small size and weight make it very easy to handle and provides for comfortable use. Dremel has provided me this product in exchange for an honest review.