Edgestar Kc3000trip 24" Wide Triple Tap Kegerator - Black

I did a good amount of research behind a kegerator capable of holding 3 kegs, as I wanted to provide options for my dad as he enjoys his new basement bar. I was skeptical of whether 3 kegs would fit or not, as reviewers on this website and others stated that they couldn't get more than 2 to fit. However, with the correct orientation I was able to *snugly* fit 3 sixtel kegs inside. Fitting 3 sixtel kegs: The correct orientation is one keg centered in the rear, with the other two on either side of it in the front. The two front kegs may slightly hang over the floor of the kegerator but the door will still close. Make sure you mount your manifold high enough on the left inside wall or else you will have a hard time positioning the front left keg. Also make sure to position the manifold so that its intake valve won't obstruct the CO2 tank's pressure gauge which I have up against the left inside wall of the unit. I also used my own screws for installing the manifold, as it seems the provided screws were too long. Despite receiving instructions for a single tap rather than a double or triple tap kegerator, receiving extra hardware, and having instructions online for mounting the manifold/positioning 3 kegs being vague or nonexistent, I would still recommend this kegerator. The confusion I endured was well worth the quality of the kegerator and the parts used to set it up. To summarize: fitting 3 sixtel kegs in this unit will be tight, but it will fit with the correct orientation/assembly. This kegerator has the quality, aesthetic, utility, and price range I expected and I would happily buy it again or recommend it to a friend or family.

It does everything it says it will do. 3 sixth barrel kegs fit perfectly. Everything has worked perfectly. Easy to assemble. Set the co2 at 12 percent and enjoy. If you have trouble fitting the three kegs in you can google how to make them fit. It gives an illustration.

Was going to write a bad review until I read the review that three kegs will fit if you organize it a certain way. I organized the kegs just like the previous review said, and 3 kegs fit perfectly. It's tight, but the door will shut. ive got 3 sanke 1/6 barrels on tap right now.

i have had this for a few months now, we have been able to get 3 kegs into it along with the CO2 bottle, it takes a bit of jockeying around, but can be done. works really well, keeps the beer cold. I would invest in better taps, especially if you are going to have them sit for an extended period of time with the lines charged.

This kegerator DOES NOT fit 3 1/6 Barrel kegs, It only fits 2 Kegs but pamphlet states fitting 2-3 1/6 barrels.

Faucets are junk and I'll replace soon. Tower is flimsy because screws just spins in the whole.

no way to fit three sanke kegs, only two. bewear buyer!!!!!!