Ematic 10"-49" Full Motion Articulating TV Wall Mount with HDMI Cable

I bought a 19" TV for my kitchen and did not want to use up my counter space. This wall mount fit the new TV and was easy to install. The swivel feature lets me swing it from side to side so I can sit at different spots in the kitchen to watch TV. It also tilts downward to keep glares off the screen. Good product!

This is a great mount for a flat screen TV. Although it's inexpensive it feels like it's put together well with high quality, heavy duty parts and feels very sturdy on the wall. Being able to angle up, down, left or right provides great versatility in mounting locations. Putting the mount up was extremely easy. Simply drill two holes into a stud and screw in the two bolts to hold it to the wall. The mount even allows a little wiggle room as you tighten your bolts if your holes aren't perfectly level. Add the mounting plate to the back of your TV with four more bolts (not included) and hang it on the mount's arm, tighten a couple of screws and you're done. Typing this review literally took longer than the install.

Works JUST fine, met all my expectations. This item was available on the exact same screen that I bought my TV on. There was one other one (wall mount) that would have worked with the set I got BUT it MIGHT have been more visible than I'd have cared for it to be. It says right on the page the minimum and maximum dimensions of TV's each mount is good for. I've only mentioning this for people who may have missed that BECAUSE I've seen many 'questions' asked regarding it. See where it says "Ematic Tilt/Swivel TV Wall Mount Kit (with HDMI Cable) for 13" - 37" Displays. The 'display," they're referring to is the TV advertised but it can also include that size PC monitor. 13 INCHES (a 13" monitor if one existed) up to and including 37 INCH monitors and/or TV's. Figure 14" to 36" inch TV's or flat panel, LCD or (the other flat panel type) monitor/TV's. I hope this has been more helpful than insulting.

Good HDMI cable. Relatively easy assembly. Be sure to note which end is up in applying plate to back of TV. You may need a few washers if screws are too long for application of plate to TV. Fits multiple TV mounting configurations. Tilt is good and may be "permanently" set up. Swivel works well and can be adjusted. I have used this on 19", 24", and 32" flat panel TVs. Only drawbacks ==> A level helps when applying base to wall..put top screw in first! A little difficult to put final two screws to hold plate to mount, but this is pretty normal for this type of mount. Obviously the larger the TV, the smaller the angle that you can swivel the TV, but for up to 24" widescreen it's pretty good. Definitely can't beat the price...at least $10 to $20 less expensive than comparable mounts. Back of TV will be about 3" to 4" from wall when pushed flat.

You need to be able to remove the television during transportation of a travel trailer and this mount satisfies that. It is easy to install and is economical to purchase.

Used this mount kit to hang a 32" TV in the bedroom. Very simple to install on a single stud. No give or bowing even when extended fully. Solid. Works for my needs!

anchor bolts didnt work with the drywall anchors. had to replace as they didnt tighten up. after replacing them it worked great.lots cheaper than ones sold in the store. better value on line.would deffinatly recomend this item

It fits my 32'' Emerson LCD TV great. It swivels nicely. The only problem I have is that keeping the TV level. It will be level when I turn it one way but not the other. Confused about this but otherwise it is a good mount for $15 bucks.

Didn't exactly fit our 32" sharp but we made it fit (Holes didn't all line up). Now that it's up, it looks great. Would've been really easy to put up if tv fit perfectly.

Cutting to the chase. Once you level out the tv it keeps moving. So when you move the swivel around the tv can loose the level you setup. Meaning the right side of the tv will be lower than the left or left lower than the right side. I check the bolts in the wall and marked them and saw they weren't moving. So the problem is where the tv connects to the swivel. I tried tightening the bolts a couple of times, but still got the same results. I would return it, but it's not that noticeable to my daughter. So I'm just dealing with it. I still may return it if it gets worst. It's a light 32" Celio tv.