Extang Xceed Hard Folding Truck Bed Tonneau Cover | 85450 | Compatible with 2014-2018, 2019 Legacy Chevy/GMC Silverado/Sierra 1500, 2015-2018 2500/3500Hd 6' 7" Bed (78.9")

Bought a cover and there was a manufacturer malfunction. Called and was given instructions on what to do to get a resolution. Within a day I was told a new one would be on the way with pictures sent of the malfunction. This was done and within a few weeks I had my new cover. I enjoy this cover a lot as it helps with our summer activities. Thank you, Adam H.

As is with most covers it was a simple installation. No drilling is always a good thing. The only thing that I experienced was the rotary latch assembly was not centered with the width of the cover. It would bind on the passenger side rail. The assembly is riveted with 4 rivets on both sides so I couldn't center it. I was able to adjust the striker and plastic housing just enough to passby the rail and still have the cover align with the bed. I had some minor leaks at the cab end. The voids there I used clear silicone on under the rubber seal. It was a truck related problem and not the cover. All in all I like the cover, but the warray should be much longer than 3 years.

I m use to the bed covers that sticks up and look like they're going to blow off. But the exceed by Extang is the perfect all around look for my truck. It's easy on the looks easy accessibility but not easy on the wallet. It's a little expensive but that's to be expected with the quality product you're getting.

Well designed, good quality, installation took 3 plus hours. Mainly due to having a drop in bed liner, needed to be removed, holes drilled for the drain holes. Also came with 2 additional installation kits required for the 2019 ford Ranger. Instructions for those kits were poor and unreadable. Had to call support for pdf files so I could read.. once installed , like the fact it locks and folds up, making the entire bed usable..

After installing on my 2019 ram 1500 (new body style) there was a small leak at the head of the bed. The leak was at the corners easily sealed with small beads of silicone and has been bone dry ever since. Twist latch and pull cords work great. I can't complain after inches of snow and rain.

Installation was pretty straight forward. I watched some videos before doing it myself. Easy operation, no latching problems like the review before mine stated. I did have to put an extra piece of the bulkhead seal in the front corners to seal out daylight, but I'm sure it will be better after it settles for a week or two. I am waiting to see how the prop rods hold up with the cover folded up to the rear window. Some of the cover extends past the roof line and the sides. There is some play where the rods are fastened to the rails. when you have the rods locked in which I hope isn't an issue when driving at highway speeds. So far I am more than satisfied. I will post another review in two weeks to update waterproofness and how it reacts fully folded at higher speeds.

I bought this cover about three years ago. It's easy to install. Very sturdy, and looks great. Some people complain about the twist mechanism but that never bothered me. My only issue is with the leather looking cover. After about a year it started to peel up on one edge. I tried liquid cement but it didn't stay. Now it's starting to peel up on the other side. I live in OH and it really doesn't get that hot. This covering wouldn't last a year in AZ or TX. My plan is to remove the covering. I think it actually will look pretty good. All in all I like the cover but might be better to buy one without the EndraCoat material covering.

Like the one I put on my Canyon, this one also had drilling chips that I had to blow off so they wouldn't scratch the cover during install. Several screws had to reset and one of the tie down holders had an oversize hole so I had to use one size larger screw to assemble the tie down hlders. Once installed cover looked great.

Overall the cover looks good. I had issues with the latch not retracting fully on one side which would not allow the back panel to open on one side. Called the manufacturer and they sent me a new latch system. The other issue is the cable trough cover does not stay attached.I think this product is a bit over priced for the quality.

still have not received running boards,with no up dates?