Flashforge AD5X 3D Printer, Multi-Color Printer & 600mm/s High Speed, 1Count, 8.7 x 8.7 x 8.7"

I'm a draftsman and programmer by trade so it was a pretty straight forward process for me to set it up and run the 1st parts. The sample PLA Filament they send with the machine is a joke. Its good filament , but it uncoils and may hang up on you while printing the samples. Keep an eye on it! By all means, use the adhesive they provide. If you don't the edge may curl up and get hit by the nozzle, thus ruining the project your working on. Ask me how i know...lol. If you have a food saver vacuum machine, then keep all filaments in a vacuum sealed bag or it could attract moisture and ruin your project. Best of luck!

So this was my first printer 3D printer I've ever owned and I HAVE to say... it did NOT disappoint. watching this thing print makes my head spin, it's blazingly fast, my eyes can't keep up! the setup could absolutely not be easier, it's so simple and so straightforward, not intimidating to me at all, especially given that I'm a beginner. my only nitpick is the camera quality inside the printer, the way it runs is kinda laggy... sort of stuttery and I don't really like that, but truthfully, they delivered so well on the rest of the printer with the software, ease of use, high quality components... I can overlook the camera for sure.

This is my second printer. I have been using it for a couple of weeks and have not been able to get as nice of prints from this machine. I do like the multi color option, but I don’t know if it is worth the lower quality. Hopefully I can figure out what settings to change to get better quality prints.

I wish it came with or told you to buy more plastic filament to use the printer. Now I have to wait for more to come.

I set it up and ran sample from what came with it but after running them it got crazy with cleaning clogs removing the nozzles i cleaned it and was only able to run once and it started back not sticking to the plate

We calibrated it and on the dirst run, the tip broke. $35 to order another one. that one came in, we calibrated it once again and the same thing happened. Now, we have ro order rhat same piece again. My son as not been able to use it because of this issue. My husband emailed rhe company, but has not heard back. It has been about a week now.

I'm not quite sure if I was sent one refurbished or what but I was not sent a spool and when I connected the power supply the connector is so loose once you let go it disconnects. Not too happy with this product.

The instructions are not clear to set up, so I called the service line that I paid $29.00 for since I thought I may need help setting up. They informed me they do not help with 3d printers, only regular printers, and they could not help me with a refund. So, CHTGPT helped me get it set up correctly; however, once we got it hooked up, the touchscreen would not go past the first screen for language. I had to email the company. Since then, they want videos and were very responsive until I sent in the video, and now, nothing. Oh, and they also can't refund me the $29.00! I'm not very happy and would not recommend this printer or company to do business with.

It immediately generated command and control traffic (botnet traffic) on my network. Wonderful Chinese technology. also, it mysteriously stopped working after 5h. the app said both that the print was done, but also that it was at 21 percent. The print was incomplete, but the machine shut off like it was complete. After, it was unable to produce filament. Seems unreliable and designed to compromise network security.

i received a clearly used product that was dusty and had filament still inside of it and after one use the screens got the printing image burnt into it.