Fusor 109B 2-Part Medium Bonding Adhesive, 1.7 oz Cartridge, Green, Paste, 4 hr Curing

Make sure you have the right gun, my husband bought one and this stuff worked great to fix my car hood. Just make sure your pushing it out to go slow, so it can get mixed together.

I actually live only a few miles from where this is made, but everything im about to tell you is 100% fact. This product puts JB weld to shame!! I was first exposed to this stuff in a body shop I ran. Here is my fusor story: I accidentally left a drywall screw in my pants pocket once and it found its way into our washing machine. After noticed a wet floor around the unit I took front panel off and found the screw had fallen perfect into a tub drain hole and once the washer hit spin it cut the tub literally in half!!! It was a clean perfect cut completely around the basket. Not wanting to spend $398 on a new tub I cleaned it best I could and applied FUSOR all way around it. That was in 2008 and it hasn't. Leaked a drop since!!!! To this day I still cant believe it not only worked but has maintain this long. Not a huge company so not much advertising, but its the best of the best. I do know they hold many military contracts so if thst don't tell ya I don't know what would.

I've used this epoxy before, with a company I worked for. I recommend if you need to bond metal together and don't weld. This product is almost as good as welding. I told a coworker about this product and he laughed and said " no adhesive bonds metal like welding". I always like to prove a point, so... He and I set up several tests. I glued 2 metal handles to square tubing and set them across a frame and told him to do pull ups with the handles. They didn't come off. Another test was easier to set up. I glued 2 pieces of 1/4 inch steel together and clamped 1 in the vice. I handed him a hammer to try and hit 1 piece off of the other. The steel bent instead of breaking apart. He was then convinced. I wish it came with more tips.