Gorilla Glue Epoxy, 0.85oz

Works exactly as expected, I use it in wet, working conditions and it hasn't failed yet Some of the pieces have been joined for over a decade All of the Waterstones snd Oilstones pictured are held to the stands using this Epoxy

I don't know how strong a gorilla is or how long he can keep his hold on something, but this is what I needed. Stayed tacky longer than I wanted, but it has a good bond, and easy to use.Good

[This review was collected as part of a promotion.] I got the Gorilla Epoxy about a week ago - I had been looking for something like this for the last couple of years for my skirting on my RV. The fasteners are adhesive and some have lost their ability to stick effectively especially when the wind is blowing. I used the Gorilla Epoxy as instructed - mixing the two parts evenly and applied to the fasteners that had come loose. They have held up really well through a bad rainstorm and very hot, sunny weather. I will be using the Gorilla Epoxy as my go to!

I used this product to repair my large painted (70-100 lb.) solid concrete pelican statue. It had cracked near the base all the way through. I aligned the broken sections and used the product packaging as a mixing plate as instructed. Once mixed I had a short window to apply the product as it begins to thicken and harden quite quickly. It took about two minutes to get the pieces put together where I wanted them. The product stayed put, with very little seepage from the application area. I did not utilize clamps so I manually held the pieces together for about five minutes. By that time the epoxy had became tacky enough to let go. I had a bit of leftover epoxy in the mixing tray and although thick and slightly harder to work with, I was able to use the leftover mix to apply the product to other areas on the statue that had minor stress cracks. This worked wonderfully as the epoxy remained clear and the repaired cracks were no longer visible. I checked back on the major repair an hour later. At this time the epoxy had dried to form a near solid bond and the pieces were locked in place. I allowed the product to cure further for another 24 hours outside in 80 degree weather with high humidity. The humidity did not affect the curing process whatsoever. After 24 hours the repaired section was fully bonded. The statue is now in one piece and the repaired areas are not noticeable. The product dries crystal clear, so the painted color sections shine through without any flaws and the epoxy has dried hard as concrete, if not harder. I am very satisfied with this product and would purchase again.

Well I thought I'd try an epoxy project, and this looked like a simple way to do what I wanted. Needless to say, I failed. This stuff is suuuuuuper sticky. I guess I just didn't realize epoxy is essentially glue still. Anyhow it was very convenient package and would recommend.

This product is the absolute best. It saved me literally days of work on one thing. After 2 years you cannot even tell it's there visually or that I used it in the area I used it(and it's outdoors). And I continue to buy the black and clear gorilla epoxy. Nothing works near as good!

My passenger side mirror was hanging on a thread for a good week before it finally fell off and broke. I ended up buying this product instead of using 2 sided tape to prevent future accidents. I added a new mirror inside and closely glued the ends . VOILA! Good as new again! I drove 80mph on the hwy and it still didn't flinch! The only thing i dislike is packaging . There isn't any thing to put on the tip to keep product from spilling. Overall , highly recommend!

This glue works by mixing two compounds and then applying onto whatever you are gluing together. I found the process to be easy and simple. It takes time to set, so I would recommend letting it get tacky for a few minutes before applying. I would also suggest letting dry overnight. It is not the easiest glue type to work with, but it does the job.

Use the product to bond, my rear bumper back to my car and it lined up the seam flawlessly and did not leave a film or noticeable residue crystal clear, super tight bond

Tried a a remedy where other glues and epoxies have failed. No luck.