Hayden Nightstand, Rustic Oak

I love my night table!! I put it together; easy to do if you have the right tools. Made sure I followed the instructions and their visual diagrams were very helpful. It is a sturdy item and has weight which is important. It was due to arrive on the 29th and I received it yesterday. Wonderful service!

I bought 2 of these nightstands in rustic oak for my bedroom, and they are exactly what I wanted. They are cheap, easy to construct, and look nice. I just graduated from college so I was looking for affordable and solid nightstands, and this does the job. Parts are labeled and assembly is pretty easy, though it does take a bit of elbow grease for some of the screwing. I also love how much weight the nightstands can support, very sturdy. Just a heads up, the back of the nightstand is not made of wood but rather a thin cardboard. It looks nice though so I don't have any complaints, just a heads up about the materials. I would also keep in mind the measurements depending on how tall you want your nightstand - at 20 inches tall it is a little on the shorter side (my bed sits around 30-35 inches tall) but I actually don't mind it all, I would just keep it in mind for personal preference. I would recommend this to anyone looking for some cheap functional nightstands.

Bout this to put my lamp and Bible next to me at night. Thought it was just a lil bigger but this is very much doable. I added wood glue when inserting the screws to add more durability. Also, consider the spacing when attaching the back panel. I did not and Im unable to put my lil radio down at the bottom to run the cord through the back. I ended up putting it on the shelf then running the cord through the back. Im older so this is just enough keep it simple and from being over crowding. Havent had it long enough though to tell you about the durability. But adding the glue Im sure will help stand the test of time. Hope you will enjoy your stand as much as I will enjoy mine! :) Have a wonderful day stay blessed up and Jesus is coming back soon! Are you ready?

When the nightstand arrived I was hoping it would be put together but it wasn't. But that was okay it was not hard putting it together. The nightstand is nice looking and sturdy. I've seen nightstands that are at this price and they didn't look anything like this one. For the price you can not beat it. I would think it would have cost much more. I plan to put books in the bottom opening which is large. You could also use this as a stand for a printer ..which I had thought of doing. It weights 19 lbs. My son lifted it for me and said he was going to purchase he and his wife one ..he really liked it also. The nightstand open upper shelf is nice for your glasses, remote to the TV, or for your medications that you take at bedtime. Overall it looks really nice more expensive that it is and is great for your bedroom or a quest bedroom or as I said a printer stand. It's durable and not flimsy in the least. Will hold right much weight. Has brackets, screws, little nails and round peg things that hold it all together. No way is it going to collapse ..too sturdy. The finish is black oak.

This Mainstays Nightstand has the clean lines and Espresso color that made it ideal to add to our bedroom. It comes with easy, step by step instructions for us Weekend DIYers. All you need are 3 tools: Two screwdrivers and a hammer. It was simple to put all the boards (A through F) together with its "cam-lock" system to hold everything in place. Screw in the cam bolts, drop in the cam locks, insert the wooden dowels (I did this by hand), assemble then tighten the locks, brackets and screws. I left the back panel (G) to nail on at the end. To make this go a little bit faster: 1. Allow yourself plenty of room to spread out. 2. Open and unpack your box. Check that you have each piece you need and take this time to divide your cam bolts, locks, dowels, brackets and screws between the different boards. It will save you "hunting" for them after you start. 3. Work on a padded surface. I used a thick towel over carpeting. This protected the boards themselves and it also kept my tools within easy reach. Half an hour later, I had my own brand new, pretty impressive nightstand!

I like the MAINSTAYS Ameriwood Home Nightstand because it is small enough to fit into the space by my bed. It measures approx. 20.4" h x 15 3/4" wide x 15 3/4" deep. The bottom section is approx. 11" h x 14.2" wide. It is large enough to hold a medium size basket (not included, but used mine in photo). Assembled, it weighs 19.5 lbs. Each shelf is stated to hold up to 40 lbs. I assembled it with easy to follow instructions and my Phillips head screwdriver. All the other items needed were in separate bagged compartments. It took me about a half an hour to complete and feels sturdy and looks attractive. I have purchased many Mainstays Ameriwood products in the past and I am happy with them. The nightstand is affordable, easy to assemble and looks good and that makes me happy. It's easy to clean, but I definitely recommend the use of coasters if having liquid drinks. Water stains can be a possibility. To make the finish more durable, I use a good spray wax when dusting to add another layer of protection. I also wouldn't hesitate to buy another one of these for the living room to hold some of my books and store some DVDs. I think it's an all-around good value.

I'm a single mom and put this together while watching a movie. It took me about 2 hrs. It's what it's worth, meaning you pay for what you get, it's not expensive. It will do the job for now. It was purchased along with the bed for my 14 y.o son bedroom. He likes it!

This table is heavier than it looks. Also takes longer to assemble than I thought it would after seeing the small amount of pieces. The only thing needed for the assembly is a light hammer and a small Phillips head screwdriver. The Panels are clearly marked and the bolts, screws, dowels, cam locks, small nails and angle brackets are packaged separately and securely. dI had my adult daughter assist me with the assembly, but really wouldn’t have been necessary. I did this in 2 different sessions, but again it is simple enough to do all at once. I have had trouble with cam locks on different occasions so I was just being cautious to get everything set up perfectly before final tightening. I find a project works better that way. I didn’t care for the cardboard back sheet as it didn’t cover the entire back of the table. It is strong when assembled and serves the purpose for which it was made. With no drawers or doors on the front, everything is easily accessible. This table would be good for a dorm or a child’s room more so than anywhere else in a home. It worked for me in the guest room which isn’t used for extended periods of time. With some imagination it could be used in other rooms, but mostly with furniture with a modern flair. I obtained this table through the Spark Review program, but don’t think I would have purchased it myself. It is a handy little table and therefore usable for someone who likes the style.

I ordered two of these night stands the first one I open and put together, no problem. The second one I bought and put together was missing a holes in the board and I had to screw holes in it to make it work. It's not the right way but it's working good enough. I didn't want to go to the troubles of sending it back.

The main picture for this item is inaccurate. These side tables are not that tall, in fact they are almost miniature! I was very disappointed when putting it together it. I have a standard height on my bed and the stands aren’t level with the top of the bed which I think looks terrible. The picture looks much nicer than what you get.