HME T Post Trail Camera Mount Steel

Works great

Pound a T-Post in ground and set up a camera. Quick and Easy.

The T post bracket works perfect. You can put a camera anywhere.

The HME T-Post holder works very well when you figure out the correct way to face it while clamping on the T-Post. Not difficult at all, there's a 50/50 chance but one side will clamp securely with no movement while the other way just will not stay clamped. These have worked well on pre-existing fence line over the last few years

It would work better if you could adjust the angle of camera with some kind of swivel instead of moving the clamp on the post.

Works fine for trail cams with the attachment on the bottom. Will not work for trail cams with the attachment on the back. There's no adjustment.

The T-Post Camera Holder is not very versatile at all, it is for ONE USE AND ONE USE ONLY. Because of the LARGE wisher that holds the Camera in place it don't fit all Trail Camera because it don't fit the one I have. I will need to cut the washer off on one side. The washer covers the Aux Power Opening.

Broke in 3 days with my camera, set one of my cameras on this after buying 4, and 2 days in my camera was on the ground. I'm six hours from my lease and when I drove back not only was camera bracket broke but on my other camera set up the solar battery was on the ground because that bracket was broken too.

First one I put up broke when I tightened the screw holding the camera. The metal rod came out of the plastic part it was in. Returned the items.

After carefully mounting to tree in a pilot hole. Mounted camera on device. Broke instantly.