Imperial 4-inch x 12-inch Black Iron Montezuma, Floor Register, Rectangular, Household Vent Cover
- Brand:
- Imperial
- Model Number:
- RG3440-A
- UPC:
- 063467888109
- EAN:
- 0063467888109
- ASIN:
- B07T3S6VF7
- Walmart SKU:
- 225792426
Current pricing at $15.28 reflects recent market activity, running 0.0% below the 90-day average.
| Price Type | Price | Date |
|---|---|---|
|
Highest Price
|
$27.59 | |
|
Lowest Price
|
$20.25 | |
|
Most Recent Price
|
$21.54 |
| Price Type | Price | Date |
|---|---|---|
|
Highest Price
|
$15.28 | |
|
Lowest Price
|
$14.84 | |
|
Most Recent Price
|
$15.28 |
Tracking History: We have tracked Imperial 4-inch x 12-inch Black Iron Montezuma, Floor Register, Rectangular, Household Vent Cover since 12/9/2022. The most recent price update was on Apr 24, 2025.
Price Range: Over the past 90 days, the price has ranged from $14.84 (lowest on 12/9/2022) to $15.28 (highest on 6/23/2024). The average price during this period is $14.97.
Current Trend: No Walmart.com pricing data available for analysis.
Customer Insights: Rated 4.4/5 from 787 reviews.
After looking for the right fit for a while, I found this one. The taupe color is right and the plastic material is perfect for a vent close to a sink. My previous metal one had rust and peeling paint. That eye sore now replaced and I am happy. Price was affordable. Great choice!
I just love these, going to order more for the rest of the house. light weight, sharp looking and can't get hurt on the sharp metal ones
It was slightly bigger than my existing one needed to trim baseboard by about 1/4” I did that with a utility knife with fresh blade easy about 3-4 minutes to complete the register itself was thick metal good quality I'm very happy with my purchase and it was about half the cost of other brands it was not flimsy it was made with quality
I purchased two of the white registers, especially because they are wider for the heat to come out in my home. The the old ones that I have in my house the slits are so tiny. I'm surprised any heat comes out. The white ones fit perfect and we're so easy to put up and screw in. Very glad I purchased them.
Got tired of looking at our old rusting steel vent registers and decided to go with this plastic - as we thought it would be easier to clean. When we received them - I was surprised at the quality. Air flows good - and just as important - we were able to shut airflow effectively where it was not needed. They work well and look great. Only drawback was that we had to order a pack of 5 - and an extra 1. They were ultimately the same price, but we were limited to just 6 because of "low stock". We actually needed 5 more. We had to buy a different model for a different area of the house.
It fit well, this was a replacement for a plastic one that cracked. The plastic one is for sale here, they work well but are not built to be stepped on in a busy area on a floor. This vent is very sturdy, only 4 stars because the vents can be moved or closed but it's difficult to move. I also noticed the white isn't a neutral white. My floor is a white with gray marble. This will eventually go in another room. I'll get the stainless steel next time.
They fit well, be aware that they sit higher above the floor then the typical metal one so if you have a Romba it will make a lot of noise when it goes over these. Also be aware that the fins do not angle to the sides at all so the air goes straight up and does not dispuruse as much as on the traditional metal ones,
Just Ok for the price point and definitely a lower build quality. The vent switcher device is flimsy and thin plastic and does not feel like it will hold up well over time at all. Probably OK for a low-use area of the home if you don't have to switch the vent open and closed too much, if ever. I have it in my basement duct and am going to just leave it closed. If this was for a main room of my home I would have probably returned it.
I have always ordered these from this site. The only problem is that the top part does not cover as much as it used to. The seller doesn't give the dimensions of the top flat part. If you have stains or the flooring doesn't come right to the hole, you will see it.
I thought I ordered 2x14 but I guess I was wrong so I have reordered it but the prices of this stuff is just far out there
Detailed price history for the past 90 days
No Walmart.com pricing data available for analysis.
Third-Party Sellers prices have ranged from $20.25 (Jun 26) to $23.05 (Aug 16) over the past 90 days. Current price is close to the 90-day average of $22.07.
| Date | Price | Change | % Change |
|---|---|---|---|
| $21.54 | $+0.00 | +0.0% | |
| $21.54 | $+0.00 | +0.0% | |
| $21.54 | $+0.00 | +0.0% | |
| $21.54 | $-1.51 | -6.6% | |
| $23.05 | $+0.00 | +0.0% | |
| $23.05 | $+0.00 | +0.0% | |
| $23.05 | $+0.00 | +0.0% | |
| $23.05 | $+0.00 | +0.0% | |
| $23.05 | $+0.00 | +0.0% | |
| $23.05 | $+0.00 | +0.0% | |
| $23.05 | $+0.00 | +0.0% | |
| $23.05 | $+0.00 | +0.0% | |
| $23.05 | $+1.05 | +4.8% | |
| $22.00 | $+0.00 | +0.0% | |
| $22.00 | $+1.07 | +5.1% | |
| $20.93 | $-1.07 | -4.9% | |
| $22.00 | $+0.00 | +0.0% | |
| $22.00 | $+1.75 | +8.6% | |
| $20.25 | $+0.00 | +0.0% | |
| $20.25 | $-0.40 | -1.9% | |
| $20.65 | $-1.15 | -5.3% | |
| $21.80 | — | — |