JEGS 3-Shelf Shop Cart [200 lb. Capacity, Black]

Excellent excellent customer service could not be happier with the way things worked out

Would be nice if it had instructions.

It's kind of low so I'm putting a 4x4 at each end between the bottom shelf and the casters. The casters are kind of small so I got larger ones from Harbor Freight. The screws provided are too short to mount the handle and hanging plate so go with some about 1/4" longer. Instructions too small to read and don't appear to have been updated for this version.

I was looking for a rolling cart for my garage.This one looked pretty good, the assembly was a little troublesome. Some of the holes didn't line up had to drill them out no big deal,a couple bolts were unusable because the threads were not cut correctly. Being metric I didn't have a die to recut them. Once all together it worked fine.

I bought this cart because it's probably the most inexpensive shop cart with a drawer on the market. Rolled the dice and think I made out well. The overall construction is decent, feels solid, wheels work well, plenty of space for tools and other parts. The assembly is the absolute worst though. Instructions were awful and getting everything lined up perfectly near the top was a bit clunky. Overall, i'd buy it again.

The instructions were the worst I have ever seen on a foreign made product. I assembled it alone and it took at least two hours to translate the broken English instructions and get it all together. The tool cart is okay, but prepare to be frustrated during assembly.

My package was late by two days, when it arrived the box was missing one end and could see some wrapping of the pieces. When I opened it up to assemble I discovered that there was no hardware other than for the wheels. Also, the instructions are printed so small you can barely read it. Tried to call customer service at 7pm and they were closed Now I have to go through the hassle of calling again tomorrow and wait for missing parts to be shipped so I can finally assemble and use my tool cart…

Received my purchase damaged.

this is a cheap tool cart and he caster will not turn because the caster bump the bottom of the cart. do not buy this trash

instructions were very hard to read with the small print. and were slightly confusing when it said to use the hex bolts and the phillips head bolts to install shelves. holes were too small to use the hex bolts so I used the phillips bolts which were smaller. but by the time i got to the top shelf I was out of phillips bolts. the only holes that were big enough to use the hex bolts were the holes for the casters. but couldnt use them on the casters because the sides of the caster brackets interfered with the nuts for the hex bolts. so i used the phillips bolts. I ended up having to re-drill all the holes for the top shelf because they were about 2x too small for hex bolts. when it came time to install the drawer sliders, i discovered the length of the bracket attached to the sliders were too long and could not install them if i had the side plates installed, as the side plates pulled the corner posts in too far. so now i cant use the drawer. it was super frustrating and laughable on how poorly this cart is constructed. i will probably end up throwing it away and just eating the cost of the cart.