Maxsa Innovations 37312 Park Right Garage Dual Laser Parking Guide, Silver
- Brand:
- MAXSA Innovations
- Model Number:
- 37312
- UPC:
- 899419000608
- EAN:
- 0899419000608
- Walmart SKU:
- 10232394
| Price Type | Price | Date |
|---|---|---|
|
Highest Price
|
$31.99 | |
|
Lowest Price
|
$31.99 | |
|
Most Recent Price
|
$31.99 |
Price history data is not available for this product at the moment.
Current Trend: No Walmart.com pricing data available for analysis.
Customer Insights: Rated 4.2/5 from 81 reviews.
Goes up in 5 minutes and it very small. The light is bright and turns off after 15 seconds of no movement. It is not noticeable because it is so small. Does the job - well worth the price, because you will always stop at precisely the right spot every time.
Takes 20 minutes or less to install. The dual laser allows you to park 2 cars in their exact place each time. The trick is you must establish the same focal point on your dash. As you enter the garage you can follow the laser dot move up along the hood. This will help in adjusting your aim to hit your established focal point on the dash. I plug the transformer in the ceiling and secure both transformer and laser with Velcro. This is my second unit, when I sold my house the new buyers were so impressed with the unit I left it with the house. It was still working after 5 years
My husband installed it super fast. It works real well. I never have to move my car after I park it anymore. It's precise, easy to see and always correct.
The motion sensor along with dual car laser guidance makes this high tech car parker seem like it should be worth much more. Definitely a great value as well as handy. It comes with double-sided tape to secure it to the ceiling - the tape will last for about 30 minutes before your parker falls to the floor, so I don't recommend using it at all. The screws are your best bet.
Works as advertised. Although it seems the laser will move slightly from where I had it set. Perhaps the vibration from the garage opening and closing causes that. I may mount it a little further from the garage door opener.
I have a 2.5 car garage and the dual sensor is not really able to reach both sides. So, I'm just using it on one side for 1 car. I first set this up just for my wifes car. However, the laser never seemed to trigger for her. I then moved it to my side of the garage and it has worked flawlessly for the past week for my car. The only other thing that is different is the garage door is closed, whereas it was already open each time my wife tried it. I'm not sure if that matters. Hopefully not, because the sensor should work no matter what.
I'm pretty happy with this product. Our garage isn't overly large and we have a lot of stuff packed in there so keeping the cars as close to the door as possible without hitting the bumper with the door has always been a challenge. I installed this unit in less than an hour (would have been 15 mins but I took extra care to route the wire through the attic instead of stapling it to the ceiling) and adjusted it with the wife's help and presto! We still checked the clearance while the door was closing for the first week or so just because but have quit doing that now.
While the product does exactly as it is advertised, in practical application, it is difficult to use. If your vehicle has a completely flat hood and dashboard top, it might be easier to use; however, unlike a tennis ball hanging from a string, it's quite tricky to line your car up as you try to get the beam to an exact spot on your dash or other chosen spot. I purchased the dual laser unit for our 2-car garage. In hindsight, I might have been better off with 2 separate single-laser units ... because they could have been placed directly over the spot on each car that were chosen. With each beam at an angle, it seems like aligning each car is more difficult because the beams move considerably as they shine on parts of the car that are higher or lower. With a single beam pointing straight downward, driving to a specific spot would have been easier. (I have removed the unit, and will be re-installing it further forward in our garage - so that at least the beam angle will only be at a horizontal angle, not a horizontal and angle forward toward the back of the garage.
The unit works okay. However the dual unit needs a very tall ceiling to mount and still illuminate on both vehicles. I have 9 ft plus ceilings and I had to build a special wedge mount. The swivel lasers simply do not have enough adjustment range. Better off with two single units for low ceiling garage.
A little pricey but the product works as advertised. It would be nice to have some control of how long the laser would stay on ... similar to motion sensor porch light, 1, 5, or 10 minutes. I find that if I take too much time to position the car in my tight garage, the laser may go off and I have to get out of the car, wave my arms madly to get it to go on again! Also, depends on the mounting location, if the sensor is partially blocked, the laser may come on for a few seconds and goes off immediately. Finally, check to make sure that you can swivel the laser pointer to the right spot before you mount the device. I find that you cannot swivel 360 degrees! Not even 270.
Detailed price history for the past 90 days
No Walmart.com pricing data available for analysis.
Third-Party Sellers prices have ranged from $31.99 (Nov 16) to $31.99 (Nov 16) over the past 90 days. Current price is close to the 90-day average of $31.99.
| Date | Price | Change | % Change |
|---|---|---|---|
| $31.99 | $+0.00 | +0.0% | |
| $31.99 | $+0.00 | +0.0% | |
| $31.99 | $+0.00 | +0.0% | |
| $31.99 | $+0.00 | +0.0% | |
| $31.99 | $+0.00 | +0.0% | |
| $31.99 | $+0.00 | +0.0% | |
| $31.99 | $+0.00 | +0.0% | |
| $31.99 | $+0.00 | +0.0% | |
| $31.99 | — | — |