Minwax® PolyShades® Bombay Mahogany, Gloss, 1-Qt

This is my 2nd time using this product. I put it on my front door and love it. I am putting a new coat again 2 years later.

Looking great on my table and chairs

the stain I bought was perfect. I was looking for a light stain color this was a perfect color for my project. no problems on my order. the varnish stain together makes it easy to use.

I can't tell  you when I bought my Minwax Polyshade, there's always some left in the can from a previous use, it's the only product I use!  It always goes on smooth and cleans up nicely and the furniture looks beautiful!

[This review was collected as part of a promotion.] Top piece was before. Goes on easy. I used an old rag to rub on. I prefer a rag to paint brush because it is easier to apply. I used two coats in the pictures. The stain brings out the grains in the wood. I like this stain a lot and plan to use it for other projects.

I'm a DIYer and have used stains & paints for 30 years. I bought this product and used it on end tables for my living room. Although, I DO get compliments on the end result, and it definitely "saved" time...I will go back to stain and poly as a separate product. I found polyshades more difficult to use and I had less ...control over the product...(if that makes sense)

I found this produce very hard to work with, perhaps because of the combination of stain and poly -- streaky colors and gummy application. Using steel wool between coats, (as directed) is a mistake, even after 7 hours of drying time as it sticks to some parts of the finish that were apparently not fully cured. I wish I'd stayed with the traditional two step strain and finish process.

Review Polyshade After using PolyShades all in one my choice is to strip the oak table and chairs again or trash them PolyShades was blotchy and uneven. Unfortunately, this all-in-one polyurethane stain cannot be adjusted the way regular stain can be. This stuff is impossible to apply without the finish looking as though a 5-year-old did it. It's globby, uneven and just plain awful to use. It's almost as though it clots. I've refinished many pieces over the years but nothing has failed like this project has. I spent well over 20 hours stripping and sanding (3 steps to 240). I used Minwax prep, and several good brushes for the poly before I switched to a cotton cloth application. I applied three light coats. Then four...sanding lightly between each with a 240-grit sandpaper and then tacking for dust. My hope was that this would even out with more applications. It didn't. Too bad because it was a beautiful piece. Now I wonder if it is even salvageable. Very disappointed in the product and would rate it less than one star if I could.

purchased the polyshade stain in mahogany. Three coats to get the dark shade I wanted,. (staining oak kitchen cabinets). I did this on an extra cabinet door I had to see if I would like it and make sure not to difficult since I have never done this before. Did not like the shine on the door. I purchased the satin but it dried with a high gloss finish. I don't want this type of finish on my kitchen cabinets to show the imperfections of the cabinets. Going to try gel stain from a different manufacture.

I bought two of the satin finish espresso cans. One came out satin, the second is very obviously NOT satin and the can was mislabeled so now I need to sand it down buy another can and start over so the table matches the chairs I already did. Quality control is lacking.