Minwax Water-Based Semi-Transparent Stain, Classic Gray, Quart
- Brand:
- Minwax
- Model Number:
- 108200000
- UPC:
- 027426108202
- EAN:
- 0027426108202
- ASIN:
- B08G5CW5Y9
- Walmart SKU:
- 374691321
| Price Type | Price | Date |
|---|---|---|
|
Highest Price
|
$32.31 | |
|
Lowest Price
|
$24.53 | |
|
Most Recent Price
|
$24.53 |
Price history data is not available for this product at the moment.
Current Trend: No Walmart.com pricing data available for analysis.
Customer Insights: Rated 4.1/5 from 211 reviews.
I have purchased many different stains and clear coats over the years and I like the way the water based stain reacts with the burnt wood. Wipes off easily on the burnt grain and absorbs into the harder non burnt grain. I would recommend this product to anyone.
[This review was collected as part of a promotion.] Okay where do I begin. I was nervous when selecting a good product for my floor because I'm very picky and I hate products that fade quickly. Well after our flooring was installed I applied this and I love it because it was water based and not oil based so it wasn't so thick and it was really easy to apply. It gave it a beautiful look after it was finished.
Very easy to work with on home projects. Little to no odor and when working on large pieces that need stained on both sides, you can just wait roughly an hour and flip and coat the next side. I was able to cover about 30-40 sqft of material with less than a quarter of the can. Only complaint is that it dries a bit too fast and you have to work quickly in small sections to make sure you wipe off the excess before it dries.
Thought I would try this out since it could be tinted. I needed a red stain and figured this would work. It is not nearly as easy to apply as a oil based stain, which actually absorbs into the wood. I followed directions, which didn't help much. I used on birch ply and not impressed with the finish. The only good thing about this is if you need to remove the stain it will sand off better than oil based since it does not absorb into the wood.
We recently stained a new table. We started by using the minwax water based preconditioned as directed, and then applying the semi transparent water based stain. It went on very easily, but soaked into the wood too fast and dried too quickly. We were looking to get a lot of grain to show through. The can says to apply and wipe off within 2-4 minutes. The stain had completely soaked in in about 40 seconds. The first coat we let the stain sit for the recommended 2 minutes, but in some places the excess wiped off smoothly, while others the rag pulled up too much or not enough stain, like the stain was a tacky mess. The second coat we did not trust the directions, and instead wiped the stain about 20 seconds after application. This worked better, but still came out splotchy. We ended up sanding the table bare and applying the oil based stain with significantly better results. In the future I will only be using the solid color water based stain to completely dye the wood a specific color.
I spent a long time with the minwax sample book to try and find a water based semi transparent stain to match existing woodwork. Pecan was, according to the sample sheet, an excellent choice. Now that I've bought a quart and applied it for a few seconds to a sample piece of wood before wiping it down, I find that the “real” color is waaaay off. Not a little bit. 50 shades, maybe more (e.g. Mahogany vs light pine). What a waste of time and money. How in the world can I determine if a custom color works for my project when the sample sheet is useless? Please help. I'd like to use your product, but I don't know how to find a color that works.
I've never encountered a stain that dries so fast. You cant use it even in small areas at a time because you cant blend multiple sections of a small table for example. The working time needs to be extended substantially to make this any use. Unbelievable mess.
I purchased the clear tint base because I wanted the wood (white oak) to show through somewhat. This is NOT wood stain and applies like latex paint. The instructions are impossible to follow under the circumstances (ludicrous, really). I've refinished and stained more items than I can count and I've NEVER been in a position where I had to fully re-sand and start over. I guess there's a first time for everything.
I find this product unusable. The only way it can be applied without looking bad was to have one person wiping immediately (1 second) behind the person applying the stain. On a small shelf (15x24), you could not cover the shelf before it dried and left blotches. So, one person wipes on and one wipes off. You have to do no more than 6 inches width at a time which still left blotches on the overlap because it dries within seconds. Any corners or bends (like the shelf edges cannot be made to look good. There isn't enough time to do the top, the edge and cleanup the bottom edge before it sets so you end up with blotches no matter what. I'm now looking to resand the entire project and start over with another product. Highly recommend avoiding this water-based stain for any project - it's impossible to make even smaller projects look good. I did use the prestain conditioner and applied using a foam brush.
We had a quart of semi-transparent Colton Blue and Wysteria made to decide which one to use. After trying both on a 12 inch tongue and groove pine board, we were dismayed to see the results. The sample and pictures show almost small wisps of blue on the colton blue sample with what appears to be a white background. When I open the can, it was 100% blue and of course that is exactly what the test board turned out to look like ... solid blue with some of the wood grain showing. The wysteria was the same except completely lavender in color. Obviously this is not what we expected and I have no idea what the company will write below but the store samples showed wisps of color and not a complete coverage of color. This was a waste of money and for those of you looking
Detailed price history for the past 90 days
No Walmart.com pricing data available for analysis.
Third-Party Sellers prices have ranged from $24.53 (Nov 20) to $28.40 (Aug 24) over the past 90 days. Current price is close to the 90-day average of $25.74.
| Date | Price | Change | % Change |
|---|---|---|---|
| $24.53 | $+0.00 | +0.0% | |
| $24.53 | $+0.00 | +0.0% | |
| $24.53 | $-1.46 | -5.6% | |
| $25.99 | $+0.00 | +0.0% | |
| $25.99 | $+0.00 | +0.0% | |
| $25.99 | $+0.00 | +0.0% | |
| $25.99 | $-2.41 | -8.5% | |
| $28.40 | — | — |