MP31YA Electric Range Burner Element Unit Set, Burner Element Replacement for Kenmore Whirlpool Range Stove (3Pcs MP15YA 6" & 1Pcs MP21YA 8")

I was happy with my new stove top burner elements and received what I paid for. Te only part of the otder I had a problem with was the burner element plates. I ordered 3, 6 inch plates and 1, 8 inch plate asa set. I received 2, 6 inch plates and 2, 8 inch plates instead. Now I'm short 1 of the 6 inc plates and have an extra 8 inch plate. Other than that, I was happy with the products.

The only issue I had was that this set is a bit unstandard to what I needed for my stove. Most stoves are 2 big burners and 2 small. I ended up with 1 large 3 small. Finding other set's in this way is near impossible other than that they are great quality highly recommend.

I have and old thin discontinued Amana (Now Whirlpool) stove/oven and this product fit and worked great!

Great value for heavy duty 8 ft extension cord.

I have a 40 year old Montgomery Ward (avocado green) electric stove. A burner finally shorted out. The other three were pretty rusty. I decided to try this set, as the measurements were accurate. In short, they work well enough. They are a very tight fit, and for whatever reason, the coils do not heat up entirely evenly, but they do heat up adequately, and I can continue to use all four burners on my stovetop. I appreciate that. The center of the coils is smaller than my original burner elements, so they are not an exact duplicate. Also, the metal prongs that plug into the stove sockets were bent on 3 of the 4 elements. I straightened them, and they looked identical to my old ones, so I risked plugging them in with the breaker off, then turned it back on to test them. They briefly burned off the coating on them; I turned on my exhaust fan and opened my door. The smell went away quickly, and there has been no noticeable odor since that first trial. I do not turn the elements up to high. They heat up quickly enough at mid temperature settings. I am glad I risked purchasing these.

does what I want it to do

they fit to a degree i had to modify them a little by grinding the end so it would lock into the groove of the stove and the drip trays fit the small ones but it did not fit the big one so i had to purchase a big one by itself

Instead of 2 big burners and 2 little one. I got 1 big one ane 3 little ones!!!!! I really need the other big one

The burners and specifics items were fine but the packaging could have been 100% better. The cardboard was so flimsy that it appeared to have ripped a few times and was taped on the outside as if it was taped at every check in point. I believe the flimsiness caused the burners connectors to bend slightly during shipment and I was weary of even putting them in, unsure if it was going to be a fire hazard or cause a short once installed and turned on.

It should have been 2 large burners and too small. I don't know any stove that has 3 small burners in one large if I would have saw this before. I ordered it. I wouldn't have ordered it now.I'm one burner short,