Night Owl Wi-Fi IP Plug In 4K HD Deterrence Camera with 2-Way Audio and Audio Alerts and Siren - White

I bought these with an eight camera kit and put them in where I didn't want to run wires, I did end up putting the extended antenna on them but now they work great

Installed a week ago. Night vision works really good. Quality picture.

The recording quality is not accurate in the sensitive mode it records with nothing moving and on both medium and sensitive mode it does not always pick an object when moving 30 to 50 feet from the cameras, like a passing car or person.

Added two more cameras to my surveillance system, now have 6 and almost the property is covered. Easy to add and set up. Put chips in each camera. This is in addition to the security system I had installed at my house.

Purchased to add range to my wired system, where I could not run wires. Took 10 minutes to install and 5 minutes to add to my app. Perfect pictures from 200 feet from router

The first NVR that I received with my WNIP2 system would not get to the startup page and had to return it. The warranty replacement NVR made it to the Startup Wizard and was now able to complete the NVR and camera setup. At first the mouse was working but the menu on the monitor didn't seem to be working. I did a factory reset to see if the menu would start working but the mouse stopped working. I then used a different mouse and it worked and the menu worked. After I plugged the Night Owl mouse into the my computer, it seemed to reset and was able to now work with the Night Owl System. I still have one problem, when I go to the computer Protect CMS App I get this: Says the NVR is OFFLINE, when it seems to be working monitor and the phone. I've tried all of this but nothing works! NOTE: If you are experiencing this status, please perform the following steps: 1. Plug an Ethernet cable from your router (network) to your Night Owl recorder. 2. Wait until a system prompt appears stating “Internet Detected.” 3. Click “Login.” 4. Enter your local admin password. 5. Click “Login” again. 6. On the Night Owl Protect App icon page, click “I already have an account.” 7. Enter your Night Owl Protect login credentials. 8. Logout of the Night Owl Protect CMS and log back in. 9. Your Night Owl device should now be showing an Online status.

I should have bought a wired system. They are continually dropping the signal then coming back at random. I have the Night Owl DVR that came with 8 cameras. I bought these last two to complete the system. The picture quality is great. However, all 10 cameras drop the signal at random. This makes the "security" cameras not so secure. It is not a range problem. The one that drops the most is less than 15 feet from the DVR. As I am typing this 3 out of the 10 cameras are offline. The monitor says "no signal".

I have had this system less than 6 months and even signed up for cloud storage. Today at about 6 AM it stopped recording anything. No push notifications, no video stored, but everything else is operational. I will be canceling my cloud account and disposing of the system as I am tired of having issues with this garbage.

multiple problems right out of the box, apparently not tested after whatever refurbishing was done. Did not recognize hard drive, not picking up or recording audio, red speckles across the pictures, not able to connect via app. Previous system I had purchased new had no issues until a lightning strike

So far, 30% of the cameras in this system have been a problem. Support takes forever and there's three hours of tech support phone-time that I will never get back. When the cameras work, they have a great view - but getting them to work is a problem