Pit Boss PB Series Replacement Heating Element & Igniter
- Brand:
- Pit Boss
- Model Number:
- 70112
- UPC:
- 684678096505
- EAN:
- 0684678096505
- Walmart SKU:
- 1374823840
| Price Type | Price | Date |
|---|---|---|
|
Highest Price
|
$15.99 | |
|
Lowest Price
|
$13.50 | |
|
Most Recent Price
|
$14.40 |
Price history data is not available for this product at the moment.
Current Trend: No Walmart.com pricing data available for analysis.
Customer Insights: Rated 4.4/5 from 546 reviews.
New igniter does not get hot enough to burn the pellets. Smoker is 7 years old, needs new grates but also rust starting to take over. This was great for 7 years, chalking it up as a good reason for a new smoker. Overall I was satisfied for those 7 years, but as others have said, these new igniters don't seem to work well.
Not quite as straight forward as it sounded. There is a bracket with a grommet in it that the connector didn't fit through. And, just beside that, the wiring makes a right angle to go out to the fire box. Hard to get around there, due to the fan. I removed the grommet and cut it so I could get it off the wires, then worked the connector thru the hole, so I could pull everything out. Same thing going back in.
It works, but if you have a Platinum 1250 the set screw no longer holds it in place since it is more of a tubular design than the original blade type with a ceramic base. The good news is that it sits there just fine. For this particular model, you have to get comfortable on your back and access the igniter from down there, not the top. It also gives you a chance to appreciate how little thought PB gave to a common maintenance item when designing these smokers.
The ignitor was a perfect fit on my grill (Pit Boss Lexington). Installing the new ignitor wasn't too bad, you don't have to drop the hopper. Just make sure to tie a string to the old ignitor before removing it so you can fish the new ignitor through. I've also used it for multiple cooks since swapping and so far its been working well.
The igniter sent does not match the original. The original igniter had a collar that prevented it from protruding too far into the firepot the replacement does not. The part was referred directly from the Pit Boss site and my specific model. I have lost confidence in Pit Boss considering that my -new out of the box grill - had a bad fuse.
We use our Pit Boss pellet grill on a regular basis. When the igniter went bad the entire family went into depression. Thank goodness for fast shipping and a great product! Removal and install was quick and easy. We are back up and grilling and the family is eating at home again!
Did not know nor seen any indication but this igniter was different than what came in my PB and would not work without me using a longer set screw. My original igniter I later found out was a rapid igniter. It would be easy and nice if they were interchangeable without having to get a longer set screw for it to work!
This igniter was a no-brainer (thank heavens) to install. Being a senior with limited mobility we, my wife and I were able to change out igniters with no problem. With the assist of the end shelf to help support the Lexington 500 the change happened within 15 minutes. Rather than a phillips screw driver to remove the pot I used an 8mm nut driver. All in all it was accomplished in a matter of 20 minutes or so.
Honestly, I'm a little disappointed with the performance of this unit. I've had to replace the control panel at a year old. And have since had to replace the ignitor twice. Not real effective when it quits 2 hours into a 10 hour pork shoulder. The draw for me was to be able to set the temperature and walk away. But it seems I have to babysit this thing even worse than my gas grill. I love the idea, but am unimpressed with the reality. Ignitor (to the best of my knowledge) is working. These ignitors were ordered to hold in reserve.
My grill is less than one year-old. It has stopped working. Looking at the troubleshooting it is either the igniter or some other issue. It seems the igniter is the most common so I ordered one. When I want to take the fire pot out, I'd have found that all of the four screw heads are stripped and I cannot get it out. So I don't even know if the igniter is my issue yet because I've not been able to install it. Very unhappy with this product that will never buy one again. I'm going back to my trusty Traeger.
Detailed price history for the past 90 days
No Walmart.com pricing data available for analysis.
Third-Party Sellers prices have ranged from $13.50 (Nov 5) to $15.99 (Nov 12) over the past 90 days. Current price is close to the 90-day average of $14.53.
| Date | Price | Change | % Change |
|---|---|---|---|
| $14.40 | $+0.00 | +0.0% | |
| $14.40 | $-1.59 | -9.9% | |
| $15.99 | $+0.00 | +0.0% | |
| $15.99 | $+0.00 | +0.0% | |
| $15.99 | $+2.49 | +18.4% | |
| $13.50 | $+0.00 | +0.0% | |
| $13.50 | $+0.00 | +0.0% | |
| $13.50 | $+0.00 | +0.0% | |
| $13.50 | — | — |