Pyle Phono Turntable Preamp

Works great at a great price. My receiver did not have a dedicated ground for my turntable so I loosened a screw on the receiver frame and attached the ground. No hum and the sound is great.

Simple, basic installation. Just connect your RCA phono plugs from your turntable to the input jacks on the Pyle. Take a stereo RCA cord and plug it into to the output jacks on the pre-amp. The other end of the RCA cord plugs into the Aux, CD, etc. input on your receiver or amplifier. Set your receiver to that specific input. You can now play your vinyl again! Note that the RCA cord does not come with the unit so you'll have to supply your own. You'll need just one stereo RCA cord and you'll be all set. The cord is not expensive and you should be able to find one at your nearest electronics retailer.

Before installing the Pyle Phono Pre-Amp I was barely able to hear any sound from my phonograph that was connected to the receiver. Now that I have added the Pre-Amp- the sound is coming through loud and clear!!! It's easy to install. After checking the internet, I found that Walmart had the best price. I am very happy to be able to listen to my albums again.

This enabled me to use my 30 year old record player with my digital devices.

I needed the preamp for my turntable. So easy to use - just look @ the picture! I did a lot of research and this was by far the best value for the money. Picked it up at the store. Long live VINYL!

I recently bought a new receiver with included several RCA-plug inputs, but was I surprised to find the receiver made no allowance for my turntable. The Pyle preamp solved my problem for a great price. Its output volume is a bit lower than the volume from digital input sources, but increasing the volume level on my receiver provides more than enough sound to satisfy my needs.

Hooked my record player to my sound system and it played so quietly even on max volume. Got the amp and it was so easy to install and works perfectly! Jamming my old record collection on surround sound!! So happy. Shipped fast and pick up was a breeze

Bought this inexpensive pre-amp by Pyle and hooked it up to a 1976 Technics SL-23 turntable running through a fairly generic brand surround sound tuner and was pleasantly surprised at the results. Cranking the volume up gives little distortion while sound quality remains stable without humming. Turntable must be properly grounded to tuner and a set of stereo (RCA) phono cables are needed from the 'out' of the pre-amp to the tuner. Great item!

The device works perfect to do exactly what I needed it for. I now have quality output in my computer from my turntable. Before adding the pre-amp I was only able to record records using the computer without being able to hear what was being recorded. Great product and a great price.

The product was represented as new but it was previously opened. The packaging was taped rather than heat sealed and the product had scratches on the case