Pyle PLMRCW3 - Universal Marine Stereo Housing w/Full Chassis Wired Casing (White)

Exactly as described. Pre-wired case keeps everything dry. * Make sure to check the dimensions before ordering* This housing is bulky.

While not yet installed, this seems like it will do everything a person could ask of their marine stereo.

I only used the front half of the enclose, worked as sold. had plenty of screws for a good seal, and when cover is closed radio is rain and splash protected. Looks good in the boat console.

I found this easy to use and get setup.

It's did what it was supposed to do although it is a little bulky since they leave more then enough room for the wires to be placed inside the housing. So make sure you have plenty of room for the enclosure. When wiring the stereo into the enclosure it is important to pay attention since the wiring on the back do not match the wiring on a standard radio at least none I've ever seen so make sure you pay attention to the color coding of the wire others then that it is a fair product.

Good product protects the stereo very well.

The housing is good but the threaded mount receiver hole failed as soon as the bracket was screwed in. Now the bracket can not be removed as the threaded insert just spins. The wiring also is not color coded to international wire color specifications. The radio that I purchased was, and when I went to wire it to the housing all of the housings wires were in the wrong place and assigned to the wrong items, ie. the red power wire was in the ground marked spot and a thin blue wire was in the 12vdc power spot. This was the for all of the wires, none were correct. If you buy this housing please look on the back before you start connecting the radio. You're going to have to trace each wire and use the color that's wired not what it should be, to wire it.

This item was received missing parts! Called customer service and was supposed to issue a refund but never did issue a refund!

The housing that was sent to me was not the right one. The housing that i ordered had no face plate. The one that i receved had the the face plate witch is for a stereo with the control knobs for turning and turning up and down (older radio) The housing was not wired the same as the stereo. The stereo has 12 wires and the housing has 10 wires. And the wires in the housing are not the same colors as the wires from the stereo. So i just made a housing out of plywood for the car stereo on my bicycle

Wiring is incorrect and does not have enough wires coming out the back. The Bracket is weak and can not be used properly.