qt Minwax 10851 True Black Wood Finish Water-Based Solid Color Stain price history and forecast - Minwax 108510000
qt Minwax 10851 True Black Wood Finish Water-Based Solid Color Stain

qt Minwax 10851 True Black Wood Finish Water-Based Solid Color Stain

Brand:
Minwax
Model Number:
108510000
UPC:
027426108516
EAN:
0027426108516
ASIN:
B091T5GQWF
Walmart SKU:
785563667

Third-Party Seller Summary

Third-Party Seller Price History Summary
Price Type Price Date
Highest Price
$19.99
Lowest Price
$19.99
Most Recent Price
$19.99
Average Price
$19.99
First Tracked
Last Update

Walmart.com Summary

No price history available for Walmart.com

Price Analysis

Price history data is not available for this product at the moment.

Current Trend: No Walmart.com pricing data available for analysis.

Customer Insights: Rated 3.9/5 from 124 reviews.

Customer Reviews

124 reviews

Customer Reviews

3.9
Based on 124 reviews
5
82
4
9
3
5
2
4
1
24
Filter Reviews:
Sort By:
Showing 10 of 124 reviews
Jan March 20, 2026

Goes on smooth, soft sheen. Great product

Was this review helpful?

Beautiful finish.

Deborah January 1, 2026

Great stain. I used this on my front door. It now looks brand new.

Was this review helpful?

Yes, you can!!

NatureCindy May 16, 2026

[This review was collected as part of a promotion.] I watched my husband pull out of our driveway to attend a 30 hour out of town conference and at the same time called by best friend and simply said, “It's a GO!”. She arrive 30 minutes later and we began the transformation of my dreary kitchen cabinets. Minwax could not have been an easier product for us to use.I am so pleased with the results and actually gasped with joy when I walked into the kitchen to make my morning coffee!! The sanding was time consuming, the hinges were time consuming, but we had 3 drawers, 23 cabinet faces with trim COMPLETED by the time husband walked in. Amazing product! (And an amazing friend;))

Was this review helpful?

Avoid This

Draco May 17, 2020

This stuff is extremely thick (like a paint). I planned on using this to stain a guitar body for a custom build I was working on. I followed the directions to a tee and began wiping the product off after 1 minute. It dried extremely quick and unevenly, leaving me with a ghastly mess on a body that took me around 50 hours of work to build. Thank god it didn't penetrate too deep into the wood grain, so I was able to sand it off and salvage my work. I'm honestly not sure where this product would shine... I'm sure it has its uses, but unless you've worked with this before, you're probably not going to get the effect you desire.

Was this review helpful?

Quart of Crap

EricB100 July 16, 2025

Awful. This is NOT a stain in ANYwhere close to the traditional sense. “5x thicker”? Why?  To achieve ONE coat? If you're up to staining your stuff. You don't WANT one coat unless you simply can't wait to get back to your smart phone. And “Fast drying”? No, no, no! You want WORKING TIME, so you can test times stain is left on to achieve richness in color. Immediate wipe-off? 5 minutes before wipe off? This is part of the fun of staining. This product is a PRIME example of a company having to fix come up with  more products to have something new to sell. That's OK. But this product goes on almost like paint, is “stain” in name only, is NO fun, and for a far less discerning eye, belonging to someone interested in speed over all else. This product was a NIGHTMARE.

Was this review helpful?

Stained and Confused

Confused February 13, 2021

I spent the about 10 years of my early life working in a furniture repair and refinishing shop where we exclusively used Minwax products, that experience left me with a long appreciated the high quality products produced by Minwax. Now several years later, and refinishing a piece of my own furniture, I defaulted to a Minwax product. I was attracted to this product (Wood Finish / Semi-Transparent Color Stain), in the color of Hickory. Largely because the color of Hickory in the oil based stain was not available in my local area, and this product was able to be mixed/made in the store, in the Hickory color. All good so far, but after applying the 1st coat, my immediate reaction was "What is the purpose of this product?" (i.e. the confusion), and "Why would anyone call this a stain?" As in no way does this product behave like a stain, in terms of working with it. It goes on very thick and it is very difficult to produce a even coat. So soon as it dried, with several inconsistencies, I sanded the piece back down to almost bare wood. Determine to use the product, I jumped in for round 2, applied a heavy coat (to keep it very wet, dripping wet) and worked as quickly as I could and then wiped off the excess. When that dried, it came out Fair (hence the Fair rating). However, I'm still confused as to what this product is intended for? Is it intended for finishing/staining wood at or near a professional level? or Is this product intended to be the "Chalk Paint" of stains? Something more for arts and crafts, vs finishing a valued piece of family furniture? I survived the experience without too much grieve, and I believe once I seal it the piece will look and perform OK. But I can't recommend the product, so back to real stains, which are far easier to work with and control, producing a superior finish.

Was this review helpful?

Too thick, hard to get even pigment.

Nandaconda October 5, 2020

I purchased this stain for refinishing a Pottery Barn entry table. Of course I spent 2 full days stripping, sanding, prepping for stain, and removed all dust. The first coat was very uneven, if product is left on too long it will remove the color. I did figure out that I was able to get it ok by filling in areas with the second coat. But there are spots where the product has piled up and looks terrible. I am now going to have to go purchase very fine grain sandpaper to assist with this issue. If that doesn't work I plan to go over this with some oil based stain which is probably what I should have done in the first place. This table would have been finished already had I not opted to try this product.

Was this review helpful?

Very thick and hard to get an even color

Desk refinish November 29, 2020

I purchased an unfinished desk and planned to finish it with a solid stain thinking that it would soak into the wood and leave fewer streaks than paint. Boy was I wrong. I followed the directions exactly and it is so streaky, and uneven in color. It is very hard to work with. I hope the desk is not ruined as it is supposed to be a christmas gift for my grandson. I plan to give it a sanding and apply a third coat of stain, after that if it doesn't look good I will have to see if I can get paint to stick to it, I will not purchase this product again.

Was this review helpful?

Very Disappointed

Old woodworker November 2, 2020

I bought this product to stain a desk top. After following the instructions of applying the stain then wiping it within 2 minutes found it made a blotchy mess. Then I tried applying a coat and not wiping it off it was better but still streaked. This is nothing like the old Minwax stain I am used to. I also checked this website for a video of how to apply and I found nothing. In the future I will just a good paint and and save myself a lot of frustration.

Was this review helpful?

The new water based stain isn't working

Tommmy August 27, 2020

Having used Minwax forever, i bought the "New" water based stain and had it tinted. (staining SW Yellow pine to crimson) This new stain is really thick. A stir stick will stand up in it. I don't like it. 1. A lot of product is left on the wood and wiping off the excess is a gooey job. Applying Less stain doesn't seem to work. 2. I finished my second coat and still do not have the deep color that i'm used to getting. (Normally a 2 coat application using the "old" thinner stain) 3. Going back for a third coat. At this rate, i'm using more stain and that increases cost. 4. Using a brush wasn't very good. It's thick and a brush leaves narrow rivers of stain that won't lay down. 5. A sponge was better, but #1 above 6. Cloth didn't work at all. The stain seemed to dry and get tacky while i was applying thin coats. OK, so maybe i need to get used to it...i'll finish this project (2 drawer chest - new build) and add a review as a follow up. Right now, court's out and i'd hold off on recommending this

Was this review helpful?

Price History

Historical price data graph for qt Minwax 10851 True Black Wood Finish Water-Based Solid Color Stain

Recent Price Changes

Detailed price history for the past 90 days

Walmart.com Pricing

0 records

No Walmart.com pricing data available for analysis.

No Walmart price history available in the past 90 days

Third-Party Seller Pricing

2 records

Third-Party Sellers prices have ranged from $19.99 (Nov 20) to $19.99 (Nov 20) over the past 90 days. Current price is close to the 90-day average of $19.99.

Third-party seller price history for qt Minwax 10851 True Black Wood Finish Water-Based Solid Color Stain showing recent price changes
Date Price Change % Change
$19.99 $+0.00 +0.0%
$19.99 — —