Roll-N-Lock by RealTruck M-Series XT Retractable Truck Bed Tonneau Cover | 570M-XT | Compatible with 2007 - 2021 Toyota Tundra (w/o OE track system or Trail Edition) 5' 7" Bed (66.7")

Wish they had more item that fit into the slots, as the crossbars I ordered did not fit and are on back order for full size trucks. Now wishing I wouldn't have spent the extra $$

This 124M-XT is my second purchase of a Roll-n-Lock retractable cover. My first was a 2017 Chevy Colorado 261M-XT with a much stronger and more reliable retractable mechanism than the current 124M-XT. Are there simple instructions available for me to tighten the spring and improve the retractability.

Overall happy with the product. It functions smoothly and does the job. For the price, I just think it's a bit under-built and would benefit from a bit more robust design. Mainly, the overall water-tightness of the design could be improved. The roll up cover's housing - the box it rolls up into - is not adequately sealed against rainwater intrusion; I had to caulk its internal seams as well as the drain holes that the drainage hoses are fitted through, and tape over two of the holes in the back of the housing. (To be clear, NOT the holes at the bottom of the housing that the drain hoses feed through. ) It wasn't an easy process as the seams are difficult to access. The removable housing cover deforms easily; it should be made of heavier gauge aluminum and/or more securely packaged to prevent it from arriving damaged. As a consequence, it doesn't seal very well against the bulkhead; I had to add weather stripping along its entire length. It doesn't look pretty; if I were handier I'm sure it would look a lot better. In heavy rain, I've resorted to applying a length of gaffer tape to completely cover the gap between the housing cover and the bulkhead. It doesn't look pretty, but it works. Lastly, installation took a couple of tries. A detailed video tutorial would have been helpful.

I installed the cover and it works as far as the retracting and closing of the cover, I definitely love this more than the roll up cover I had on my last truck. It also clicks and stops in place so you can have it partially open/closed, that's an awesome feature. However there are spots where water enters into truck bed at the corners. Where the drum is, I attached a picture that shows the gap, I think this can be corrected if they cut the weather stripping in correct place instead of overlapping each other. At the rear of the bed there is a gap between the cover and the rails that lets water in. However I have a bed floor mat so most of the water travels down and underneath the mat so it's not a huge big deal but enough for me to not store tools in the truck bed, to keep from rusting. If they made it to where there was like a wedge seal on the rails then I think this cover would be perfect. I attached a picture of it as well, where the gap is. I also think the gap may close up if you mount the rails about 1/8” or 1/4” shorter than what the directions say, I have not tried this yet, I may try it at an 1/8” shorter to allow for expansion/contraction of the materials but still be smooth for opening and closing the cover. Or I may try to find a rubber seal in shape of wedge and see if that works. Whichever I do I will try to post a follow up afterwards. Overall I really do like the cover and would buy it again if these issues were corrected. Lastly, the installation instructions could use some work to make it easier to understand.

I like it, but it was delivered with a slightly dented canister and missing one bolt and washer and a small scratch on the canister.

Getting the order fulfilled took what seemed like a long time. Two weeks of asking Customer Service "When will it ship?" I did not get an answer. I finally pestered the Sales team then it was shipped the next day. The Tonneau cover itself arrived in good condition, fit perfectly and was not at all difficult to install.

I bought the Roll-N-Lock M series XT retractable cover for my new 2025 Ram 2500. I had purchased and installed one of these in 2014 on a 2014 F150. I am pleased with the design and concept. My new truck is a crew cab short bed with gooseneck/ 5 wheel pre package form Ram. I intend towing an gooseneck trailer occasionally so the retractable cover is necessary with the short bed. I have a 2019 Ram 3500 dually with an 8 foot bed and a Bak-Flip cover. It works withe the 8 foot bed but I couldn't see it working with the 5 wheel or gooseneck hitch. The problem i am having is the driver's side latch will not stay latched. The plastic truck bed caps are hitting the cover's striker. The mounting hardware does not give you any adjustment for additional clearance.

Disappointed that pieces that were offered if purchased before Dec3 did not come with delivered items QR code for installation instructions took me back to purchase page . . no install instructions

I used to write installation instructions as part of my job. I found the instructions for this product lacking in many ways. There were pieces loose in the box that there were no instructions for. A one- hour or less project turned into about 4 hours. I wish now I had chosen another product.

Not happy with this product , it will not stay latched . Adjustment is correct on the rails but will not stay latched closed even if locked . I would not recommend this cover. My roll n lock cover on my F 250 has functioned flawlessly since 2015 but it latches to the tailgate . I bought this one for the T Slot rails but that seems to have been a mistake!