Rough Country 3" Lift Kit for 2003-2009 4Runner/2007-2014 FJ - 76530

Thank you, quick service great product,.

Great kit... doesn't overextend anything on the undercarriage. Comes with all the hardware you need and more! Be aware you will need to fix the pitman arm/ drag link situation since the stock steering won't be straight anymore. I invested in an aftermarket drag link. Also be prepared for it to take a bit longer due to rusty bent components. Truck rides better though. Keep an eye on carrier bearings, u joints, e brake cables, brake soft lines and steering gear angles to prevent wear. Needing new springs gave me an excuse to lift the 84!

Lift was a straightforward install. However the hanger bolts to the leaf springs proved difficult to remove. I needed to purchase new pins for front and rear leafs and new pins for shackles as well. Otherwise, the stance looks good, ride is even better then before!

This lift is by far the best your going to get for the price, everything bolts up nice and easy , just be careful when your taking the shackles off , because the stock shackles are junk the threads will get FUBAR quick, also just make sure u have a full size floor jack or your install time will take a lot longer than expected , but all and all a great lift for an even better price . ~happy customer

This lift improved the look of my car dramatically. To top it off, and it may be placebo, but I feel like the vehicle actually rides much smoother. Overall I'm extremely happy with the aesthetics in addition to the new tires installed. (245/65r17 Falken Wildpeak A/T Trail). If you're on a budget like myself, this is the way to go. I HIGHLY suggest letting a certified technician install this lift. Of course, the camber was way way way out and you MUST perform an alignment after install.

1999 Tacoma prerunner- very easy to install, took me about 2 and half hours to complete and then had the shop do an alignment. truck looks good and all though it recommends 31x10.5's, you can easily fit 33s which will be my next purchase. will upload pics once I wash my truck.

Very happy with Kit and the looks of my sequoia. Great customer service. The kit was shipped missing one rear shock. No questioned asked, they shipped another pair.

I installed it on my 2021 rav4 xle awd.. all the parts fit onto it. Having a little wobble when turning from a stop but goes away when I drive straight.. hopefully getting camber bolts, aftermarket rear control arms and realignment will solve the issue.

Expect 6-8 hours. Use an entire bottle of pb blast on every nut and bolt to come off. Save yourself a head ache and unhook the front drive line when doing the front end. The back end didn't need unhooked. We did also have to trim some of the new bushings to fit I in some spots they were just a bit too thick. Aside from that went very well and is way better than the tired springs that were there probably raised me close to 8 inches due to shot springs and shocks before.

As other people have stated. The instructions are not in the best order. A video of the install would be very beneficial. I did the install myself in about 7 hours. That was with me fighting with the rear end install. If instructions were written better I could have completed the install in about 4 hours. Also, the crush tube for the shock bracket started deforming prior to reaching proper torque which made it difficult to get shock into bracket. I would personally loosely install bracket, then install strut, then torque to specs. Overall a solid setup requiring minor instruction changes.