SKIL SRT1039, 120 V Manual Fixed/Plunge Base

Great for the price. I us a skil router with the table therefore this allow the bit height adjustment from the top. Thus I can dial the bit in with out issues.

SKIL has completely upped their game when it comes to quality, performance, and durability. I run a small side business involving woodworking and laser engraving. SKIL's products have completely enhanced my business and products!

Good router, does the job I needed it to do. Great price for a full size router.

Easy assembly, sturdy table, bit and part storage. Solid router table at a very good price.

makes routing easy and the storage doors are a great addition. A must have for beginners.

This is a great setup with the router and the table offered as a set. A great bargain and works very well. Do pay attention to the bits that you purchase for use, as they make all the difference. I love the soft start feature!

Love the router table. Easy to build and am learning more every time I use it. Bought the all router first with the double base's. Wish I knew if they had a set with both base's and the table.

The router and table are nice but would suggest three design improvements after using it. 1. The angle the router is installed make is difficult to install dust collection. 2. With a plastic fence I would provide shims to improve support for the offset outfeed. 3. I would lower the switch to provide additional room at the router head when installed.

It's a decent little table and that's it If you plan on any serious and precise router work plan on looking into a good fence system It works but when locking down the fence I ran into major problems with movement on the alignment Holding alignment straight or offset was not good , on the off side especially and obvious I finally used plastic commercial window shims and got some use out of the fence that came with the table The suction inlet needs to be the full 2” too it clogs up every time It does a job just not up to standard level that it is designed- looking like it does I've ordered another manufacturers fence system see how that brings it up to standard operating level?

high hopes that this would be everything i needed. The shortcomings are: the fence barely a piece of MDF with thumbscrews. Very tough to set and the markings on the top are useless. Dust chute constantly clogs and the routing hood is difficult to use. The. Table is not flush with the router plate and i had to sand it down to keep items from hanging up. The bits are hard to change in that you can't see the router to find the slot to seat it. The table top adjustment stripped the second time i used it so all adjustments are made under the table far from view. The storage compartments fill up with saw dust faster than the dust chute so storage is non-existent. Finally it's a weird height so it's too tall for a workbench or table. I had to build a custom stand for it to use.