Starlink Gen 3 Pole Mount Kit,9ft Starlink Ground Pole Mount Kit Features a Durable 1.5'' Diameter Pole with No Dig Ground Anchor

easy to install and easy to the adjustments for placing the device in the correct alignment. It seems very strong with great welds and excellent metal materials

Got this because..i had previously bought the pole mount from starlink... but had no pole....This whole kit is a way better alternative than just a mount and trying to look for a pole your self at a hardwear store..We also had some 60mph winds the other day and it didnt move..on this mount.

couldn't get a good signal or alignment to I'd placed my Starlink onto this post, it's about 8 feet tall, works perfectly, and its easy to assemble.

Easiest instal of the pole unit for Star Link set up. Absolutely fool proof installation of the pole.

this was the perfect mount for our 3rd gen standard starlink. Super easy to install and very simple to adjust your orientation once installed.

The pole mount is sturdy. it holds the antenna solid, once aligned it stays put. The base screws into the ground easily. The mount is very well desighned.

Works as it should good quality seems sturdy but I only use 2 sections of the pole

it was a little hard to stabilize in the ground. once I got the satellite on it, it swayed slightly and kept moving. a little concrete stopped that.

Upon opening my purchase we found that three (3) of the necessary screws were missing from the box. We could see that the plastic bubble wrap had been previously opened, but gave it the benefit of the doubt. Now we have to find out who to contact to get those screws. There is no paperwork included with the product, and no contact information to request assistance. I will be contacting Walmart for a resolution.

The connection pieces do not lock together in any way, so even a brisk wind will cause the entire array to twist and get out of alignment. If you use more than a couple of segments then the sway is so bad that it not only would result in bad alignment issues, but will put the entire array in danger of real damage. I used a total of 2 segments (about 3 1/2ft) and superglue to lock them together just to have a mounting setup and have something to keep it all off the ground.