Strongway 25-Ton Screw Jack, Heavy-Duty Mechanical Jack, Construction Jack, Load Stabilization Jack

Really heavy duty and well made

I like the screw jacks that i bought from you!! When i ordered them i asked the salesman if they came with a bar to fit in the bar hole and he said yes. I never got one....was wondering if it was possible to get one???

My local church rectory had contacted me to do some design work as i am an Architect. Upon a site investigation of the cellar, I noticed a cracked floor joist. I ordered the floor jack from NT for this application as a Mechanical type jack in lieu of hydraulic was necessary to insure positive lift with holding power. This "screw type" jack has performed not only in lifting power, but in maintaining and holding the adjusted area.

I purchased a pair of 15 ton and 25 ton Strongway Screw Jacks a few years ago. They have been the most versatile jack stands I have owned or used. I recently purchased two more 25 ton screw jacks. The adjustability and heavy build is just what I was needing. I use them on everything from Heavy Equipment, Trucks, Auto and welding and fabricating when needing to level or position a piece off the floor of the shop.

Bought two of these screw jacks for lifting and leveling settled buildings when rebuilding foundations. I use about ten jacks and cribbing to raise and level old buildings and then add WF I-Beams and concrete for a permanent job. I like the precise adjustment possible and the fact that they hold their position unlike hydraulic jacks

Bought 2 of these mechanical bottle jacks to lift a cabin in Vermont and work on the foundation. The 25 ton capacity handled the job with ease. When employed under load these jacks held true and did not exhibit creep reversal typical of some hydraulic bottle jacks. The jacks also double as a set of deluxe jack stands when working on vehicles. I could not beat the price anywhere. Yes, I would definitely recommend these jacks to a friend.

Hello there after using this tool twice I can say it works flawlessly. By the way the jack do not come with a turn bar. so I purchase 3 foot leth of black gas pipe From Home Depot, cut the threats of each end and it work fine. signed Me

Using it to stop settling issue. Possible improvement: chamfer the inner edge of the bottom to remove burrs that easily cut fingers when carrying the jack two-handed.

This is my 4th unit. I originally bought 3, plus 2 hydraulic jacks to lift a 10x20' building. I bought 2 additional hydraulic jacks plus this screw jack to lower the building back down.

I used two of these jacks for extra support under my cabin porch. They are very well built and easy to use. I would buy this product again.