Titan Attachments 82" Skeleton Rock Grapple Rake, Universal Skid Steer Quick Tach, Fine-Grade Open Tine Bottom, Replaceable Cast Bucket Teeth, Reinforced Side Cutters, Universal Landscape Attachment

I was greatly surprised at the quality and heavy construction of the rock bucket. Very well built! Perfect for the rocky ground here in eastern Oklahoma. Made quick work of an area I have been wanting to clear of rock leaving mostly dirt behind. Worked great moving downed trees. This is so sturdy I can think of multiple uses around the ranch. Easy to operate, able to pick up individual large items with the grapple and the grapple helps hold the rock in the bucket if you need to shake it to get any dirt out. Great price for a great product. Locally similar item was 2 to 3 times higher priced. Free shipping was an additional plus.

Very nice attachment the independant grapple is very nice😉

I find it to be very well built and of heavy duty construction. I have two minor items that I would change. First is the shields over the cylinders bumps the grab handles on my skid steer, so they need to be trimmed a bit for my application. Very minor issue. Second is I would like to see the spacing to be less than 4 inches. It lets rocks through that I would like to keep in the bucket. I have seen negative reviews about Titan but I find there are no negatives on this one for me. I am hoping to try the Titan Xtreme Tree in the future.

Very awesome heavy duty bucket.... grapple arm design/placement could use a little work. In the first fw hours of use, I nearly broke one of the hoses because of the way the lines are routed and how the quick connects stick out. Basically when I open the grapples, unless I am really careful, the top of the grapple hits the hose where it meets the quick connect. I have another grapple that has 90 degree quick connects that more or less solves this issue and I just bought some 90 degree adapters, but I think at the very least this should come standard with the 90 degree quick connects. Also, the fact that the hoses come out the top of the grapple cylinders (rather than the side) exacerbates this issue. Would be way better design to route the hoses out the side or best yet on the bottom of the cylinder. You can basically tell the person who designed this never really used it much. Anyhow, the bucket itself it awesome and super heavy duty which is why I give it 4 stars, the grapple part need to be redesigned a bit though.

It is very well built. The only problem I have with it are the hydraulic lines. The lines come straight out where they hook up to my John Deere skid steer and when you have the bucket tilted back and open the grapple it broke the hydraulic lines off and where they plug into my skid steer it broke it off also. I put 90 degree fittings on the hoses and replaced the hook up on my skid steer. I haven't had any trouble since. It cost about 250 dollars for me to fix it.

This bucket is built heavy enough for anything we’ve put it through so far dug rocks half the width of the bucket and moved 30inch diameter trees my complaints would be not having any protection for the hoses, very light protection for the cylinders, the grapple can hit our John Deere 329e rolled all the way back open, and the grapple tines pinch Behind the front cut blade so fine grabbing is much more difficult. But all that aside this is a solid attachment especially for the price.

well built, rugged construction. it takes a little getting used to because the sides make it difficult to grab large piles of brush. the only problem I have had is the grapple does not stay open . they seem to bleed back through the seals in the hydrolic cylinders. over all I am pleased with product.

This unit is well constructed and works perfectly. However, I should have attached to my new Kubota and SLOWLY checked all clearance issues. Any new equipment like this will need to be "tuned" to fit your machine. My Kubota SVL65 track steer had interference between the left grapple and the Kubota hydraulic supply manifold on left arm. I changed the hose ends to 90° elbows. I will add cylinder stops to restrict the full retraction of the left grapple. And I will add a wooden stop-block to the grapple cylinder protector keep the cylinder cover from hitting the Kubota cylinder protector. This all could have been avoided if the LEFT grapple cylinder and its attendant mounting hardware was moved to the right 3 inches. This would not diminish the grapple effectiveness at all. The hose 90° elbows would still be needed, however. Finally, I would put on a hose hanger on the left side of the bucket, the same that Titan makes for other units. I am gong to try to purchase this from Titan next. Remember, these modifica

The rock bucket was well made , great price , but when i ordered it i forgot to look at the weight specs. The bucket to heavy for new holland tn65 tractor , squatted the front 11.2-24 tires, i did try out , just to heavy for my tractor. Sold it to a friend J R Bristol , same price i paid for it, nothing loss , little wiser next time i order , will be looking at 60 inch rock bucket 3 in spacing and see if they come as a sale item, thank you

Great heavy duty grapple. Excavates and cleans excellent. Hose wrap and connections are top notch. Smaller sticks tend to wedge in side slits from time to time, only complaint.