Tyger Auto T3 Soft Tri-fold Truck Bed Tonneau Cover Compatible with 2005-2015 Toyota Tacoma | 5' (60") Bed | TG-BC3T1030

This bed cover works very well for me. Is sturdy and fulfill the purpose of keeping items dry in the back.It fits my Tacoma 2007 perfectly.It should last a long time if well maintained. I'm considering to use some uv protection over it.Happy with this purchase.

For the price this seems to be too good to be true. This took about 15 minutes to install on my 2012 Toyota Tacoma. I caution you to make sure you have it centered before installing it as the next day I did have to move it around but it is easy to remove so it was no big deal, just a pain to redo what I had already done. The instructions were just ok but most people should be able to figure it out. Insert the Utility Rack clips in the rails and then line up the front clamps. Tighten the set screw on the clip and then snug down the front clamps. Unfold for the back and do the same thing. It keeps the bed pretty dry although there are some gaps. Clamps on the front would eliminate the front gap but weather stripping can be used. I would also advised getting a lock for the tailgate.

Overall pretty impressed by this cover for the price. I think the whole bed rail/track thing that Toyota has done with these beds is complete garbage, but there isn't much I can do about it. I was Leary of ordering because of the rail system but everything I needed was included. I didn't make any changes or have to mod anything. All the brackets and things I needed were included. The material of this cover is actually much better than the extang I had on my f-250. We will see as time goes how she holds up. To anyone considering this cover, just order it. It's nice and does the job. The only complaint I have is the back of the cover near the tail gate. The seal doesn't exactly hit the gate lip. It touches but it's just not centered over it like I would like it to be. In order to achieve dead center the cover would actually have to hang over the back bed panels. Everything else centers right. With that being said, I don't think there is anything this company can do about that either. It's the way Toyota made the bed.Update 3/18/12: It rained pretty good yesterday and much to my surprise, the bed was really dry considering the little spots on each corner of the bed the have daylight coming through. I also got to take the truck on highway speeds today as I have a 45 mile drive to work and this cover didn't even act like it wanted to move. I seen earlier reviews that suggested movement from the front of the cab. Not the case here. I am also going to try and upload some detailed photos to give individuals a better idea of installation. Hope this helps.

About a 15 minute install time and it was up and running. After 6 months, it is still like new. Driving in rain will allow some water into the bed but not enough to get anything wet. The only word of caution would be regarding the sharp edges on the attachment clamps. They can produce some nasty cuts and scrapes if you fail to pay attention to what you are doing.

This product was easy to install, IF, you use the attachments provided with the type of vehicle you have. I struggled with this for close to an hour and finally looked in the bag and there it was, the attachments for my existing rail (2005,Tacoma, dbl cab). The hardest part of fitting the tonneau cover was the clamp down location. (3 slots at each location). It was just a matter of choosing the right one and then unscrewing/screwing them back together. This cover is easy to remove when you need the whole bed to transport stuff and easy to reattach after. The only drawback to this system since it is easily removed is that you must purchase a locking tailgate unless it comes standard with the truck. My 2005 did not come with a locking tailgate and I purchased one back in 2006 so I had no problems. You will not be disappointed when buying this item.

I will give it five because the price, the fit is amazing, easy installment, looks good, allows decent security, and the material. I have taken it through the car wash and have little if any water leaks, at 65 mph the top vibrates, but not that much. The material looks like it will stand up to the Arizona sun and rain for years.

Company forgot to send one of the clamps. Once I notified them, they shipped the piece I needed immediately. Once the installation was done with all of the proper pieces, I love this product! Looks much more expensive than it is and it keeps all of the snow/rain/carwash water out! Bed liner is bone-dry in the pouring rain with this on. I also love that it can fold up in case you need to throw larger items in the back. Set up took about an hour and the finished look is great! Was going to get this as a temporary fix while I saved up for a shell, but I don't think I even want the shell anymore because of how much I enjoy this product! Definitely recommended. Great customer service when I needed the extra piece.

I did a lot of research when looking for a tonneau cover for my 2006 Toyota Tacoma and ended up buying this one. for the price and quality it can not be beat.the item is very well made and comes with everything you need to install it. The led light is an added benefit.Pros:PriceQualityLed lightCons:there is a small gab between the cover and the front of the bed. not really a con because even though the gap is present water still does not get in.

The cover required a little finesse to fit evenly and stay even on my Tacoma. The mounting hardware worked well however I needed to add some weather stripping to allow it to be slightly more weather resistant. After skimming the instructions it was a quick and easy install. In the couple of months that I've had it it wore well and did a admirable job of keeping items dry and snow free. It never sagged from snow and cleaned off well.

In all honesty I haven't drove it at high speeds yet but everyone seams to have the same issue with high speeds lifting the front end. It has only 4 side clips. So I made 3 front clips out of some left over hardware from some hanging blind mounts I horded when I threw the blinds out. (I save weird stuff like that, for just such a project.) I bent the end over to clip, and fit it into the rail of the bed cover and then turned the flexible metal clipso it clips snug into the bed rail. Feels tight of the front now and I can still remove the cover without tools. I have drove it at 80mph with my clips on and it doesnt move. Works great and they are still easy to remove.