Walker Edison Modern Sliding Slat Door Sideboard, Ebony and Dark Walnut

this takes 3-5 hours to build but could have been easier if better designed. Biggest issue was instructions say not to use power tools but you should make pilot holes for the "m" screws because the pilot holes the manufacturer made are terrible and you will strip the screw heads otherwise. Pictures for instructions are not as clear as they could be particularly whne it comes to the hinges, they could have made things more clear which would have sped up the build. not very pleased that the drawers are razor thin 3mm board with a 1.5 inch support board. it reduces the use cases for the furniture for it being chincy. overall looks very nice when completed though. some pieces were also not number labeled which slowed down the build and others had some scratches when i opened it.

None of the pieces and hardware were missing. The difficult part is screwing pieces together because pilot holes to start screws do not penetrate the hard particle board. If you can afford it, pay to have it put together before delivery.

The looks of this item is very cool! But the material is cheap - partial board stuff for most of it. The top is already peeling and I’ve had it for a week. Takes a bit to but together. And a piece broke when tightening a screw. I wouldn’t of spent what I did for it if I knew the quality.

After it was assembled by a professional we could not open the drawer……we called Walmart and we're told there was nothing they could do….then after discussing they said some body we pick it up….and they would tell us if we would get a credit……very disappointed with this answer..we paid for assembling the unit ……and are not even sure we will get credit…we will have it repaired and keep it ……

The website says that the furniture is made of MDF but actually is only 1/3 of the furniture is made of MDF. The majority of the pets are made of particle board, that means a type of wood that when get water or humidity expands, deforms and get ugly and starts falling apart. Very disappointed! Looks great but with particle boards made it just an average furniture. Also the package arrive with one of the parts damage in the corner and unfortunately it is the corner that is visible. A brand new furniture that already looks old! Bummer

The order arrived damaged and returned the Item and customer service confirmed that the order was received at the facility. now more than 14 days since the order was picked up but still haven't shipped the replacement. very frustrating shopping experience with Walmart

The furniture is beautiful but it arrived very damaged in the corners. This is not the first time this has happened to them. They would protect it better. Please note that shipping costs

Didn't get to see it. It's extremely heavy and it must have been handled 'without ' care because when i opened the box the first piece was split almost in half. The box says it needs a two person moving team but only one person took it off the Fedex truck.

READ THIS FIRST. This is just a fraction of issues with this Walker Edison Sideboard. Delivered in a box that wasn't suitable for the weight of contents. The thin box was broken on both ends, several tears %26 holes, with nearly a roll of tape used to try to hold it together. After opening, went thru %26 amazing all pieces were there %26 intact. Nothing appeared damaged from the shipping process except the box. Followed directions exactly to assemble, all by hand NO power tools used. Starts with drawer hardware %26 then drawers themselves. During this 3 of the screwhead broke off (see picture). Next was the interior assembly; glue in dowels (not enough glue provided for all ends) %26 add middle support. Interior then attach to bottom, gluing again. This is where I started to notice some scratches %26 dents. 4 hours in only about ½ done, decided to let is sit overnight for glue to dry. 2nd day is when it all went bad, the back pieces are the issue for the top fitting flush, they are uneven which you don't realize until go to put the top on (see pictures). This is when I called WalMart to inquire about returning. However, that is NOT possible because 1. Original packaging is unable to be used to ship back. 2. There is NO WAY you could re-package this to fit back in box. 3. I had already assembled %26 glued ½ way (4 hours, 4 drawers, interior, bottom base %26 legs) %26 I would damage it trying to disassemble which would be my fault %26 would void it being returnable. 4. Returning to store is not an option because it was from a 3rd Party seller using Walmart.com %26 even if it were; HOW would I get it there?! 44 pieces (140lbs) the hardware. So basically, I'm stuck with it %26 out hundreds of dollars. I continue to assemble only to discover more %26 more scratches %26 dents on the front slat pieces (see pictures) and have 2 more screwhead brake off, stickers that cover hardware don't stick and those same stickers… are glued those to the ends of the slats which are frayed %26 poorly done %26 trimmed (see more pictures). The quality and hardware of/for this product is absolutely JUNK! Do Not Waste Your Time %26 Money!!

It took my husband 3 hours to put together and one of the last pieces he put on he noticed it was damaged. When talked to Walmart about it they said he would have to take it all apart to get a refund.