XtremepowerUS Full Beam 37 Ton Horizontal/Vertical Gas Powered Hydraulic Log Splitter with 277cc OHV Engine, 2" Ball Coupler, 16" DOT Tires, 2 Stage Gear Pump, With Auto Return

They put the heavy package close to the porch actually closer than I hoped . That brick pad there made it helpfull to put it together . Thank you FedEx And Walmart .

best purchase for my money

I personally have not used the item but my son uses it and he is pleased with wood splitter

awesome wood splitter ..does the job with no effort..highly recommend for at home use

Nicely Crafted.... For Effortless Wood Splitting!

GOOD NEWS FIRST. THIS SPLITTER IS GREAT FOR MANY TYPES OF FRESH CUT WOOD (3 OR 4 MONTHS OLD) UP TO 12" ROUND. IT IS VERY EASY TO MOVE AROUND. NOW THE BAD NEWS. THE MANUFACTURER OF THIS SPLITTER HAS NO QUALITY CONTROL WHAT SO EVER, HAND PAINTED SOME SPOTS & SMALL PAINT CHIPS IN OTHER SPOTS. MY BIGGEST PROBLEM WAS WHEN THE SMALL BOLTS HOLDING THE RIGHT LEG CAME LOOSE & BENT WHILE SPLITTING WOOD, I HAD A VERY HARD TIME REPALCING THEM BECAUSE 1 BOLT IS VERY SHORT AND IN A VERY TIGHT SPOT, THE HOLES FOR THE OTHER BOLT DID NOT LINE UP TO RUN THE BOLT THROBLESSED ONEUGH, SO I HAD TO DRILL NEW HOLES (RIGHT & LEFT LEGS) TO PUT THEM BACK ON.

The manufacturing tolerances of this splitter aren't up to US standards. The unit arrived with a snapped off bolt loose in the packaging. The reason it broke was that during the manufacturing of the handle(s) and the frame assembly the hole on one handle for said bolt didn't line up with the hole in the frame. This forced the worker to angle the bolt through and in tightening the nylock nut the bolt was stressed sideways, thus setting the stage for the rough handling in transit (the package arrived almost completely wrapped in clear packing tape) to snap the bolt in two . Using the hole in the tubing of the handle as a guide I drilled through the frame in the correct position and replaced the bolt/nylock nut with stainless parts. Also, the wheel assembly area is very flimsy and was (easily) bent resulting in the unit needing some adjustment to stand steady in the upright (storage) position. The wheels wobble greatly on the axles, so one needs to be careful wheeling the thing about, especially on uneven surfaces. Functionally, the unit performs as expected for a 7 ton splitter. The two handed operation safety feature necessitates some acrobatics to hold an out of perfectly round log in place with the right hand while using one's left hand to hold down the motor activation switch and one's left knee to depress the ram activation lever until the ram contacts the log enough to stabilize it. With steady usage it appears as though the hydraulic fluid may thin out as it heats up, causing the unit to stall out on larger length logs more easily. Letting the unit stand for a while seemed to mitigate the problem. Also, I was splitting recently cut live maple wood which was harder to split by far than some dry logs I had. The splitter actually did well in my estimation. All in all, this splitter performs as well as can be expected for its size and cost.

Will split dry logs as needed. Some larger wet logs can be split on the edge. Great for medium to small logs. Not a high-end splitter. I knew what I was buying.

it says it's 10 ton, it might be five ton if that. doesn't want to split harder wood, even if the wood already has splits in it. once you get pressure on it you can hardly move the handles back and forth. The jack on it definitely isn't a 10 ton jack at all

Product is titled, 7 Ton Electric Log Splitter, 7" Mobile Wheels, Red. It was not as advertised. Wheels are only 5.5 inches. It was supposed to be a 2 HP motor and it is only a 1.75 HP motor, so I question if it is really a 7 ton capacity. At least the "Red" promise was true. I checked to see if I could reorder, but the product was sold out a few days after I received mine. So I doubt they will even post this review since this product no longer has a webpage. I am not pleased. I thought bait and switch was a thing of the past.