Ecotex® Screen Printing Emulsion Remover Gallon - 128 oz.

The item worked wonderfully and it doesn't break the bank. I will continue ordering this product when I run out. A little bit spilled but more than likely on UPS's part. The cap was taped down but somehow broke and the liquid spilled out, luckily it wasn't that big of an amount.

Not sure what I was thinking by not using this stuff. My exposure time is soooo much shorter than when I used Speedball which really helps in our printing process. Not having to mix hardener and waste money on dried up chemicals is a definite plus. We are never going back.

When I clean my screens, I will hold a sponge up to the mouth of this and let out about 1 caps worth of this remover, really just enough to lightly dampen the sponge. A few passes over both sides of the mesh (squeezing more out of the sponge for any tougher areas) and it easily washes out with water. I have washed out at least 20 screens with less than 8oz of this stuff. Couldn't be happier!

Work great. I spray the frame and let it sit for about 30 seconds in a remover bath and it takes the emulsion right off, even sometimes with no spraying needed. I've got these chemicals on me many times and experience no issues at all, cant even feel it on me where others I needed to wash off right away. Great product and it stays on our shelf! Thank you.

This stuff is awesome,I am new to screen printing and didn't really want to spend the money so I would use just the pressure washer. Got this stuff 3 sprays with a squirt bottle little rub down with a brush, then hit it with the pressure washer for 20 seconds, perfectly clean. Power washer only would take close to 5 mins. Also I diluted it the 4-1

I was a bit hesitant because of some of the negative reviews, but price is great and some of their other products work well for me, so I gave it a shot. 1st try on a screen that had been used, washed and sun dried several times. Did not work - but then neither did the speedball remover I'm trying to replace. Emailed their customer service. They were quick to respond and helpful. Then tried it on screens as I would normally use the remover: burn a screen, not liking the results and wanting a second go, or some one off projects...the remover worked quite well and was very easy Work to reclaim the screens. Saving a fair amount of coin Compared to other removers and will definitely reorder!

TBH I haven't really used any other remover, but I guess it's just because this one hasn't given me any issues, I have a very dingy shop and I do my reclaiming outside, if you are the same make sure that the uv is low to avoid any emulsion lock, It can happen in less than a minute if it's really sunny

When I tried this emulsion for the first time I loved it right away. Removes the emulsion off the screen real easy. This is my second time ordering this remover and I got a bigger volume this time. We will come for more of it again! Recommended %100!

I'm only in the beginning stages of learning how too screen print. Let's just say I've had to reclaim a lot of screens feom trying to get exposure time right. I bought this emulsion remover and have to say, "this is a great product." Emulsion comes off with ease. Most definitely will be sticking with "Screen Print Direct" cleaning chemicals and inks.

This did not remove the emulsion from my screen.