Furmax 65 inch TV Stand Entertainment Center with Sliding Barn Doors and Storage,Rustic Oak

The directions are complicated but if put together with 2 people it goes faster took about 1:30 to build! Love the look tho!

I disliked the directions I ended up needing my bf to help they could've been a little more detailed but it wasn't too bad. I know you get what you pay for I absolutely dislike particle board so I wasn't able to use the pieces for the back at the very end. Again if the instructions were better detailed I would've known what they were meant for. I attempted to screw one in %26 realized it was gonna pierce the back board and be seen through the front so I didn't end up using them. Overall the stand is gorgeous bc I'm going for a farmhouse theme in my living room it's just beautiful

I found many with the same design and this was the cheapest. SO glad I didn't spend more because I love this piece in my living room. I'm a single mom and put it together by myself. Some parts would be easier with 2 people, but I got it together alone in a little over an hour. I had issues putting the cardboard pieces in the back but managed to make do. Holds my 60” TV perfectly!

By myself it took about 1.5hrs to assemble without any issues, but I do see how one step was confusing for other customers. It is sturdy and turned out as advertised. There was a slight cosmetic defect on one of the doors. Overall, I would recommend

It was pretty easy to put together. I did it all by myself as a female. The overall look is beautiful. I didn't notice until now that the front barn doors do not have handles on them which I wish they did. Also I noticed when I made one error when installing I put some of the screws in areas they weren't supposed to go

This looks nice once it's put together, but the diagram lacked a necessary detail on the base panel that would indicate the correct orientation when attaching it. So I had to guess, and naturally, I guessed wrong and had to disassemble the whole base to get the panel off. I knew I had to attach the base panel with metal runner to the front. Problem was it was so early in construction I didn't know which side WAS the front, AND the diagram drawing was missing the detail of the metal runner! I've put together a lot of furniture in my lifetime, so this one is not for novices. Lastly, the rolling farm doors really need to be messed with a lot. I only attached screws to the outer two holes and center hole so the doors will actually roll on the bar, leaving the other two holes empty. Also, the door hardware on the back of the doors stuck out too far and was getting caught on the cabinet's verticle panels! I had to get a longer screw for the center front hole of the roller bar so the doors would hang out farther from the cabinet. In short, the time it said it would take to put the cabinet together was 3 hrs, and it took me about 6. Nuff said. The Left pic below shows what Im referring to as the center front hole screw. It's the middle one on the roller bar that I replaced with a 1/2" LONGER one than the one provided. The Right pic shows one of the two holes/screws I did not use to allow the cabinet doors to actually roll. (I plugged the hole with some wood putty.) Good Luck!

Missing one IMPORTANT piece that is keeping me from completely finishing. Can't put door on due to one piece that the factory missed. Directions are not completely accurate so you will have to add parts in holes before you finish. I have contacted the seller in HONG KONG to get a replacement part. We'll see if this ever gets finished. Would get a better review but parts missing and paint is chipped is embarrassing when you are doing it as a GIFT That's a lot of crap to have to take back to the store Part on right has factory piece. One I left doesn't. A .05 cent piece for the trouble I'm going to go through to get done or return. Unless Lowes has something

Beautiful farm house tv stand, for the price and the quality I thought it was a steal. Beautiful tv stand, matches my style, easy to assemble. Took me about two hours, probably less with two people. The only thing I was say lead me to two stars is the doors/hook pieces did not fit on the track. Once on the track the doors are too long, or when I put the door to fit the bottom it did not fit the top. I hope my pictures help describe it more. Not sure if i should just leave it open without the doors or just make it a DIY project to make it look decent….

One of the boards in my box was wrong so I couldn't even finish assembling the stand. My box contained two side boards for the right side, rather than one for the left. Walmart hasn't been helpful at all in getting the missing part, or even helping get in touch with the unresponsive seller/manufacturer for a resolution. Now I'm just stuck with something I can't even use.

For the price it's not bad but you get what you pay for . I am missing a part that goes on the very bottom and it's a critical part that is needed to make the stand go up . Now I have no clue what to do . I was sent three of the same part . If you look clearly at the picture I was sent three of number 18 instead of two and one of 17 for which goes with number 16 to make the whole bottom base.