Hyper Tough 12 Amp 7-1/4 Inch Corded Circular Saw with Steel Shoe, Adjustable Bevel

I found this power hand saw very surprisingly well built and ease of operating and with a blade which comes with saw very sharp and cuts through plywood and boards at ease no struggle or trouble while cutting. Affordable make obtaining a tool easier for budgeted individual or individual's I recommend this product even through its a Chinese made a quality tool.

during the job my other hyper tough broke, i can't even remember when i bought it so many years ago. so i knew i was going to go get another one. get's the job done.

This was purchased because I got the idea to make a rolling broom shelf that could fit beside my refrigerator. The tool was easy for me to use and handle and did the job perfectly great purchase.

Identical to my 'old' Skil Saw.. Not sure how Hyper Tough does it for this price.. but to include a carbide tipped blace to boot.. this saw is an extrodinary value.. there is no reason to buy expensive 'name' brands. The quality of this saw is excellent. It takes 'tools' to make tools.. probably this is where the tools that made the old saws went.. into making these grteat saws again !

I needed a circular saw asap and didn't have the time to search and decide on a more premium branded one. For the price, it can't be that bad, right? The answer depends—what material do you need to cut? How precise does it really need to be? I made pine shelves for a utility closet and for an interior linen closet, and this is a great saw for that kind of work. I also had to cut several two-by-fours, and several pieces of sub-flooring. This saw cut easily and handily through all of it. And that's why it gets 5 stars. Now the caveat is as good as this saw works, it will never achieve the precision, build, durability of a better saw. It's not priced for it. The blade depth adjustment is stiff and feels like it's going to break down over time. The cutting fuse isn't square, even the bevel angle isn't square. I used this saw to cut several pieces of cabinet crowning and it was slow, the saw got hot, and it became apparent this was the wrong tool for this specific job.

I had sheets of particle board that I needed to cut. I do not really need an expensive saw since I rarely need to cut any wood. I wasn't expecting much for the price, but I was very surprised. This saw cut through the particle board like it was butter. If you need a saw for projects around the house, this is a great addition to your tool set.

picked up this Hyper Tough 7-1/4 inch circular saw mainly because the price was hard to beat. For basic jobs around the house it actually does pretty well. I've used it for cutting plywood, 2x4s, and some small framing work and it handled those tasks fine. The saw is lightweight and easy to control, which is nice if you're not using a circular saw every day. It also feels decent in the hand and the blade that comes with it works well enough to get started. The only downside I noticed is that it can feel a little underpowered when cutting thicker lumber or when you're trying to move quickly through a cut. If you push it too hard it bogs down a bit, so you just have to take your time and let the saw do the work. Overall, for the price it's a solid tool for DIY projects, occasional use, or someone just getting started with basic tools. If you're doing heavy construction every day you may want something more powerful, but for homeowners it's a good value.

The saw is fine - it was the tool I had been needing for some time, at the most economical price I could find within the distance I was willing to drive, and available to be picked up within a few hours. I still feel annoyed, however, that there were none of this model (the least expensive) on the shelves in the store so I could just pick one up and buy it during one of my many frequent trips to that store during which I sought to buy one.

I don't blame the manufacturer for this issue, i blame the walmart associate. The saw has a old used blade! Not a new one so this must have been a return item. I noticed the blade right out of the box, I still give it a try and the blade was so dull, it buggged down the saw, I couldn't cut into soft white pine for over 6 inches. This wasn't a manufacturer issue, this was a walmart management issue, selling me a item like this knowing it was a return, used item but charged me full price! This doesn't happen that often, but this does make the 4th time over a 2 year span, it only happens when I allow walmart to pick my items for delivery or pick up. So, my new rule is, never allow items like this to be picked, go in and pick it out myself along with any other electrical items, power tools, and meats. After 4 times of this happening, no more. I'll walk in and pick out my important items myself. Lesson learned! The problem is, I work a lot of hours and don't have a lot of free time for my woodworking projects, so I do this at night in my workshop. The saw itself qorks fine.

saw didn't last two uses before the pen came out the front that holds the plate level and keeps the saw blade from jumping down to maximum depth. That makes it dangerous. The next time I used it, it smelled funny and had some smoke. I'm afraid to use it again. I paid $4 for the protection plan. I'm nowhere near a Walmart store, so I checked to see what I do on the plan. it says..." I'm sorry it seems that you don't have a plan" however, on the receipt it shows that I paid for the plan. then it tells me I've got 90 days to return it. well that's this week cuz I have not had any kind of time or transportation to do so. so I'm going to try to go down there this week. and I'm taking the saw in there and I'm walking out with a new one. or they're going to value their receipt and handle the financial part and return all my money. I've been to Walmart number for a long time. I get weekly deliveries, and there's been many times where I've got multiple deliveries through the week. That's because we spend. they've always treated us Fair, I don't understand why this is coming out like this. I'll find out when I get there. This review will be either put down or put on top of everything they've ever seen. I just don't understand. valued customer,?!?