Innova ITX9400 Inversion Table

I was kind of afraid of putting it together after reading the reviews but it wasn't that bad. Took about 10 minutes to remove all the plastic and padding and then just over an hour to put together. I can see where this would be a bit much especially if you already have back pain. I'm working with arm injuries on both sides so getting up and down off the floor repeatedly and trying to tighten the bolts slowed me down. I also for some reason expected you'd need someone to lower you into position. I did not realize you're supposed to self rotate. Thank goodness my other half was on standby considering my two injured arms I didn't want to risk pulling myself back upward solo. Seems like a fun machine, mostly got it four our daughter but I can't convince her to mount it. There was an attempt.

This inversion table is excellent!!!! I had a sciatic nerve going on in my butt down my leg-- I googled it-- dont trust the medical team anywhere these days!! It was no fun putting together--frankly it sucked!! But when you go all the way upside down and feel everything pull out of place__ just like you did back in the days of climbing on the monkey bars and going upside down stretching out those muscles disks spine-- oh wow it does wonders!! Yes get this machine!!!

Follow the easy to understand directions, comes with tools and everything you need. Takes up up less room than I suspected with plenty of room to go forward and backwards. Maybe not right after eating a meal, you can do a 180 on here if ya want! The base is super sturdy and I safely lay upside down for back pain, and blood to brain. I just stay that way for a few minutes myself but some people could use this for certain yoga methods, it is a lifesaver! I also use it in horizontal position and lock it in, feels like you are floating. Make sure you hear the click locking your ankles in, so secure yet comfortable. And even if you are dealing with weight issues this will secure you in as the weight limit says, crunches are an option as well! I looked at many others, affordable yet strong and comfortable were my goals and this exceeds my expectations by far. Sincerely one of the best purchases I have invested in health. If you warm up as a singer or do meditation mantras for chakra balance this frees you up until you feel your self vibrate, not possible standing on floor alone easily. A good half a dozen positions to lock in, I safely stretch forward as well and fold for further maintenance of the spine. Carefully doing soft twists to crack back into place and ready for the day. Morning, afternoon and pre bedtime routine, this has become a very important part of my life! Excellent quality! Super comfy, and one person can assemble, follow directions closely. In no time you'll go from the getting used to being off your feet ahhhhh, and extending back to being a regular frequent flyer, ha! And THIS is the ticket. Excellent job Innova! If you have feet or leg swelling, please consider trying this, I promise it will do you good.

only dislike package show up 2 days later than what tracking said it would be. To their defense it was a holiday and a weekend. I personally didn't figure it would shiw up till that Monday. Even tho it said out for delivery. All good here .Happy Happy Happy.

I got it unboxed and assembled in a few hours. Set aside some time to unpack and inventory all the parts, it took me almost as much time to unpack everything than to assemble it. Everything was individually wrapped in plastic and reinforced with cardboard if necessary. I can see why it only has a 300lb limit. Even though the metal tubes give it an appearance of being overbuilt, when you start working with it, you will see that it is not heavy gauge steel and can distort if you over tighten the nuts. The weakest point is the footrest (the platform you stand on when getting on the machine) which bend when you stand on them. For reference, I weigh 210lbs which is well under the weight limit. That being said, everything fit together well and assembly was relatively easy (minus a bonehead thing I did because I didn't read the instructions carefully). There is no need to worry about falling over when inverted, it is very stable. I went fully inverted and my back felt better afterwards. What the directions doesn't tell you is that the farther down your head goes, the harder it is to pull yourself upright. There's no gearing to help you, it's a straight 1:1 pull back upright. Just keep this in mind when you go fully inverted. Resembling a ladder, the legs fold together. It's almost compact and easy to move around. I say almost because the length is about 6' when folded. Feature wise, I'm a bit disappointed. I was hoping that the selection points locked the table into the 6 positions, it doesn't. They're stoppers and just prevent the table from going beyond the chosen points. If I start at position 1 and want to change to position 2, I have to go back down to change the setting. Having the ability to change on the fly would be so much easier. I'm surprised that they didn't include a remote release for the hold down mechanism. I have to bend down to release my feet which causes pain to my back which pretty much negates the positive inversion affects. I'll need to attach a strap or chain to pull the spring-loaded release pin. All in all, everything works, I recommend this device.

For the money, this Inversion Table is excellent. It is well made, comfortable and easy to use. The adjustable ankle pads work well and cause no discomfort. I am 5'10" and my wife is 5'5" and we'd both rate this table as a 100/100 given its design and purpose. I also love doing decline situps to further work my abdominal and and oblique muscles. I'm 60 years old and find this table affordable and relaxing method to stretch, straighten and strengthen our backs. My wife has scoliosis and absolutely loves the way she feels after using this table. It doesn't take up to much space, so we are able to set this up in our bedroom and use it several times a day. Only recommendation is that TWO people put the actual table in to the frame. It is a bit awkward with its weight for one person to hold in place and properly align the four bolts and tighten.

I have been wanting one of these for a long time, finnaly settled on this one. One of two equally best options, (The other was same brand, model 9600). this site had best price, and fastest shipping and is a site with a name I trust. cons: -did take 2 hours to assemble with 2 people. (but was easy and almost fun) -seemed a bit heavier than the ~50lb the desciption said -mine had a slight flaw (~1/2 inch) in the fabric on the back at the bottom. pretty negligible). It is fun and feels good. Too soon to know if it will deliver the expected results, but looks and feels promising. Satisfied with this purchase.

I don't have anything bad to say about this, other than how hard it is to move around mainly due to how heavy it is, but that's the quality of the metal. And I wish there was a handle or something to do with my hands to get more pressure on the lower back when I'm completely upside down. I unload tractor trailers for a shipping company so this inversion table is a must have, and for just over $100 with the shipping, you can't beat that.

It was actually very easy to put together. It had instructions, labeled parts and the bolts, etc were labeled by step as well. Easy to use and comfortable. For the price it was exactly what I wanted and it works easily. The only suggestion I would have would be for the manufacturer. I would suggest making the foot rest adjustable. Where the ankle clamp hits on me is more on my shin so I have to lift up to have it clamp tight enough on my ankle area.

I actually like it but I believe it is used. I gave it one star because the backrest has a cut in it. I have it together now so I am not sending it back. I am sure within a month the cut will have ripped all the way across. I just did not expect to buy something new that I had to put duct tape on before I could even use it. Oh yeah, the backing on the backrest is very loose, it will not last long..