J-B Weld SteelStik Epoxy Putty - 2 oz

I bought the JB weld because I had bought a set of metal shelves from Temu and the shelves are lattice work attached to a frame. I just wasn't sure that I trusted the welds, so I immediately thought of JB Weld because I have used it for many other projects and saw my dad using it since I was like five, The repairs are always very strong, and the full cure time is only 15-24 hours at room temp, and less if out in the sun.

I've used this product several times but most recently for a cracked Mercruiser engine block (water side only) . After grinding down the block I used this epoxy to fill some larger cracks and wahlaaaaa ! No more leaks this season and no worrying about constantly having to use the bilge ! Great product …..

It Works Well with many Things But When It Comes to You Things That Need to Be Re Welding Like The Wrought Iron Chair with Mesh Seat I fixed and seems to be Perfect But The Next day when I sat on it Besides that I fixed my Broken Frame on My Glasses and the Fix worked Great for a long time till I bought new Glasses

i love this two part solid epoxy. You can easily join different materials very securely. JB Weld stick is extremely strong and you can easily rebuild areas broken off or missing and build up areas for strength. the material holds very strong and when applied correctly you will end up with a stronger joint or break than the original item. Mix to a uniform grey color and apply while sticky. As the epoxy sets, you can shape the material for a smooth uniform repair using heavier amounts fo areas needing extra strength. I always have a stick of this epoxy available. I have also found the JB Weld version to be far superior to other varieties of this two part epoxy.

I have used this for years. My first experience, years ago, was repairing a leaking engine block. I prepped the area and applied a patch of this and the engine is still running today. With this tube, I repaired a small engine block with a crack the same way. Fantastic stuff.

I've bought this on several different metal to metal projects works great. Just make sure you follow the directions are it won't work as it should. Great name brand product.

I use to patch holes in my car and it really works well. Then i grind it smooth with a grinder or bondo over it. Dries within a few minutes so have your area prepped.

I am more used to the two tubes. But this is okay too. Putty and hardener in center. Can just smush around to mix. Imagine just as good. J B Weld is some good strong stuff.

I had an office chair with a plastic base. The area that held the castor broke. I used the epoxy to fix the broken area. It has held after several months.

This was a substitute for the two-tube set I am used to using. It does have a cap that goes on and off quickly but leaves a mess. The black portion of the mix had bubbles in it and did not distribute evenly. Only thing made easier was locating the one item instead of looking for two. Not my first choice but will due in a pinch.