Kreg KHI-PULL Cabinet Hardware Jig

I received this in the middle of home improvements. My father has just ripped out the old cabinets in my bathroom and he used this tool to help him install the knobs and the drawers inside the cabinets. He said he loves it and wants to keeps it. I told him I would have to think about letting him keep it because we still have to do the cabinets in the kitchen. He stated this tool gave him stability for the knobs and drawers. It held it in place like a second hand.

This is a very handy little tool! My dear husband wanted to update our kitchen cabinets an drawers. Since a complete overhaul and kitchen remodel is not in our budget this year, I thought redoing our hardware was a lovely compromise. Our home is not overly large and once we assembled the jig, the installation of our pulls and knobs took less than hour. The jig was user friendly (for me as well and I have never used a jig before; though my husband had and was also quite satisfied in this jigs performance). Once the jig was “set”, it did not move on me an provided perfect holes every single time. I would very much recommend this jig to anyone who is looking to remodel or spruce up their cabinetry. We are looking to add hardware to our bathroom cabinetry next weekend since this was such an easy project thanks to the jig! The hardest part was choosing the new hardware and pulls that I wanted. Once underway in the project, all the drilled holes I drilled were exactly where I wanted and needed them to be! Our kitchen cabinets have never looked better and I cant wait to use the jig again!

I love this tool. Once you've got the hang of it, it's super easy to use. It holds the distance from top and placement of holes for a pull. The only con in my opinion is that it doesn't have ability to measure the centering from the sides. I'd also like to note, this is best used with a clamp of some sort. Overall, I'm pleased and love the time it has saved!

I received this product in exchange for my honest review through the SparkReviewer program. I have so many good things to say about this! First, I just got a new house and had some drawers that needed handles replaced and this came just in time! It is extremely easy to use and really helps get the holes drilled correctly. I will definitely use this again when needed!

I was in dire need of the Kreg KHI-PULL Cabinet Hardware Jig before I knew it. I had new cabinetry installed, but it didn't come with the hardware. So, after decided on what hardware I wanted to use, I thought how hard can it be to screw in a few screws. Screwing the screws in was the easy part--deciding on the hardware placement was the hard part. I knew where I wanted them placed, but making certain they were aligned with one another and on the same placement no matter the width of the drawer proved difficult. I was so excited to get the Kreg KHI-PULL Cabinet Hardware Jig. It allowed me to keep the placement of hardware the same distance in each piece of cabinetry. I was relieved knowing once I drilled my pilot hole, everything would be aligned. If you need a template that takes the guess work out of hardware placement, choose the Kreg KHI-PULL Cabinet Hardware Jig, it will turn your difficult task into an easy one. (Only a few more to go!)

I received this hardware jig delivered in a nice package. I used it for adding knobs and handles to my kitchen cabinets and bathroom cabinets. It helps when installing cabinet pulls its easy to measure and space them accurately. The cabinet knobs were a little harder the rubber pads that are supposed to keep the jig from moving actually allow it to creep a bit when you clamp it in place. Make sure you double check your measurements and make sure the jig is flush with the drawer. Overall the tool helped me get all my cabinet knobs and pulls on evenly and they look really good I must say. I received this product from the Spark Reviewer Program.

It was easy to use and worked well for my kitchen pull handles. I would have given it a 4.5 but only had the choice of 4 or 5. The only thing that I didn't like about it is that if you're not careful it can slip a little. It would be nice if they added a clamping mechanism or a guide on each side to keep it from slipping. To help I would drill one hole and slip a bolt into it before drilling the other hole. I did 20 handles with perfect results.

I couldn't wait to receive the Kreg KHI-PULL Cabinet Hardware Jig as I have always wanted pulls and knobs on my cabinets, which I bought in anticipation of acquiring this tool. It did not disappoint. I read the instructions carefully and made sure I had some of the other necessary equipment (you will need a clamp or two), I even had a board to practice on first. Once I felt pretty comfortable with everything, I went at it. My cabinets look amazing! Everything is centered and I only had to make the necessary holes. This has to be one of the easiest things I have done, but was too scared to do before this tool. Very happy, and definitely recommend. I can't wait to pick out knobs and pulls for the rest of the house!

I'm very happy with this little jig. I used it to add cabinet hardware to a kitchen remodel and the whole process went by fast and smooth. The jig is easy to use. It is well constructed and the hole guides keep the drill perfectly perpendicular to the material while drilling. It is very easy to set the stops to center the drawer pulls. It helps install knobs and pulls with easy, repeatable accuracy. t has adjustable guides for accurate hole placement, built-in measuring scales for repeatable results, versatile for mounting single and multi-hole knobs, and has adjustable edge guide for easy positioning.

Pros: - I love it has indexing pegs which can lock preset common center-to-center dimension - Can be used to center different things other than cabinets but it's limited by the maximum distance this product offers which is 128mm (64mm from the center to each side) - Has Horizontal and Vertical centerline Cons: - The First assembly picture might be a little bit hard to understand but still easy to guess how to install - Edge guide doesn't have a peg system like and seems a little “loose”, I mean the space between the slide and the frame is quite wide making it have an inclination difference of 0.5 inch max from side to side(see picture). A built-in level measuring tool and/or reducing the “loose” part would help.