Minwax 356100000 One Coat Polyurethane, Gloss, Clear, 1 Quart, (1 Piece, 1 Pack)

"This is the item I really needed. I wasted the ""free express delivery"" with Walmart days on an item that was ""unavailable"". Why couldn't I have been called and given the option to cancel the entire order? I only added the Primatene Mist inhaler on because I was expecting polyurethane."

It does the job. My wood pieces were coated and lightly glossy on the first passing after drying. I did wait for them to dry completely before I stored them for later use, they stuck to each other and I had to pull them apart causing some wood exposure. Worked great, just don't stack them or store them next to each other while you're waiting to complete your project.

i wiuld like s refund on my order i still havent recived it

It doesn't hold up too well to water

Smooth application and good drytime. Vent well:)

every project i have i use min wax

Read all instructions several times and this is just bad product for wood. It's like painting with Elmer's Glue-- only you cannot get the bubbles and brush strokes out. Did they add foaming agent? Literally dries looking like there is glitter in it.

This product sucks. It doesn't go on evenly, leaves streaks and even though I applied with a very expensive brush designed for polyurethane the streaks are insane. I tried part of the counter with a foam roller and it was better but I couldn't get all the roll marks to not show. I went online ahead of time and read what to do and followed instructions. I wish I had read the reviews first.

Overview: As described. Experience: Good for single or multiple coat application, Like most finish urethane you must use a good brush and slow continuous stroke. With this thicker material it is even more important to do so and not re-brush once applied. On large surfaces it is more challenging, I opt for a 2nd coat so as not to worry about working the first coat to much. Also wait the appropriate time for second coating or you will make a mess. leaves a water resistant chemical resistant finish the looks good and as advertised in less time. I have a bit of a cheat that I have learned over the years: I do the first coat with the thick 3x as it fills imperfections well, seals the wood and levels out the surface (if applied correctly), then wipe with a Scotch Brite sanding pad ( like a greenie scrubber but finer) then finish coat with the thin standard urethane and it gives me a perfect finish every time.

Worked great. Clear and water based. Easy cleanup. Hope it lasts.