Nanoskin IRON FREE Paint, Wheel & Glass Decontamination Fall Out Remover 5 Gallons - Removes Iron Particles in Car Paint, Motorcycle, RV & Boat | Use before Clay, Wax or Car Wash for Car Detailing

My car is white and I have not detailed it for at least 3 years, so it had a lot of orange spots on it from iron contamination. This cleaner cleaned most of it after just one application. On top of that, seeing just how much other contamination that was not visible to the naked eye was shocking. After rinsing off, I went over the car with clay but it really was not necessary, the clay bar was still clean after doing the whole car. This really works great! I used about 1/2 bottle on a full size car.

My first white car and I freaked when I saw all the little rust spots after washing it. After some research I learned about road fallout. This spray was easy to use...just spray on, rub in with a sponge brush and rinse. I followed up with a clay bar. Took 2 cleanings do to couple years build up but if I use it each I figure it will only take one cleaning. One bottle was plenty since the worst spots are back and sides of Escape. Cheaper than the other big name of this type of product. To think all that iron fallout is on all cars but yoou just can't see it!!!

This product works great!, My BMW 328i was full of rust dust, real bad! After 2 applications done!

It does what is said.

This product did not work on my car. It is a 3-year old SUV. I applied two coats, followed the directions, used a sponge to agitate the spots, but they were still there. It wasn’t until I used a clay bar that I finally got the iron deposits off. No thanks to this spray. Look elsewhere for something tougher, or just get yourself a clay bar and luber spray.