Hyper Tough 20V Max Lithium-Ion Cordless Impact Driver, 1/4 inch Quick Release Hex Chuck Type with 1.5Ah Lithium-ion Battery & Charger, Bit Holder & LED Light

I received the Hyper Tough 20V Max Lithium Ion Impact Driver and am very pleased. Wasn't sure what I was going to use it for but already it has come in handy around the house. And outside, a part of the fence was starting to tilt, well I had the wood screws in there quick. Normally I would have waited for my husband but I was able to take care of it quickly (and not two weeks later)! Small, fast, and powerful it gets the job done.

Hyper Tough 20V Max Lithium Ion Impact Driver - I RATE 5 STARS! I chose this product to review because as a woman , I wanted to use this impact driver to do a lot of handy work for my home and for my friends homes as well. It has a powerful interchangeable (fits other Hyper Tough products) 20 Volt rechargeable Lithium Ion battery that gives 1.5 Amp Hour. The whole driver weighs only 2.51 lbs. - 1/4 quick release chuck -Max Torque 155 Nm/1375 in lbs. I found it to have a very comfortable grip , and was capable of doing the different tasks I wanted it to do. Battery lasted pretty well, really like the LED light and the variable speed trigger. This impact driver comes with - Impact Driver - battery pack- battery charger- 2 inch driver bit - Instruction Manual - 2 Year Limited Warranty. This impact driver has two to three times more torque than the average drill driver. With the power and precision this impact driver can handle all types of work with no problem at all. It is a true easy to use and gets the jobs done without much mess or stress. I appreciate having dependable power and assurance knowing it is capable to out perform and handle all the work and like the name , it is HYPER TOUGH!

The battery took 2 ½ hours to charge fully the first charge. I have owned a Black and Decker screwdriver for several years and use it often. In comparison, this Hyper Tough Impact Driver has a light, is Compact and lightweight so easier to use in confined spaces and drives longer screws better. I like that you just pull back the front and the bit snaps in. It comes with one Phillips head bit. I already have plenty of bits to use for drilling and screwing, so this wasn't an issue for me. It does not have any settings to chose from, it goes forward and backward and speed is determined by how hard you squeeze the trigger. This driver is extremely handy and practical; Useful for most of my everyday needs. I'm a DIYer and I have put together a shelving unit and hung curtain rods with it with no problem. I am impressed! It drives long wood screws very easily and it broke loose rusty nuts and bolts without a problem. It made the jobs I used it on go quickly and easily. I don't foresee a problem with this drill as I am not a contractor and will only use it around the house. It is a must-have tool for folks like me who do their own work around the house. It's powerful and holds a charge exceptionally well. I love it!

This is a 1/4 inch 1.5 Amp-hour battery operated impact driver. You will not use this to bust off lug nuts from your 18-wheeler. You can use this to drive screws and bolts, drill holes (but I don't recommend that, use a drill!) tighten or loosen fasteners, etc. I have been using it to run screws and bolts out while disassembling a small engine. The smaller stuff it busts free and zips the bolts or screws out. Some stuff I used a breaker bar on first, then switched to speed out the fastener. Battery life is good, charge time is reasonable. My hands are fairly large and I have hit the direction selector a couple of times. If I were using this to drive fasteners it wouldn't be an issue, but I am using it to back them out. A bump puts the selector into lock mode. There is an LED light on the driver, it lights only when the trigger is pulled; there is no delay like on some more expensive models where the light stays lit for a few seconds after you release the trigger. I'm working on small engines so I don't need this feature. If I were under a car or something, maybe, but I always have other light sources in those situations. Maybe a cabinet installer might find this inconvenient? I wish there were bigger batteries available, but so far this has not been an issue. The weight has not been an issue for me, it is a lot lighter than an 1/2 inch electric or pneumatic impact gun!

I have used this drill for a variety of projects and I am impressed. The drill works quick with a powerful motor. With the battery pack on the bottom of the drill, it is not too heavy. There is a light beneath the drill. It turns on when the drill is operated. The battery pack is easy to charge - follow the directions. It is comparable to a black & decker drill, just cheaper. You will get a good buy with this drill.

The battery life is impressive. Charges in less that 15minutes and lasts for 3 days of at least 3 hrs of use/day. It also comes with 1 drill bit, would have preferred more but that's okay. My other drill did not come with a bit, I had to purchase set of bits separately.

I bought this for one job - changing lawn mower blades on a zero turn mower. It worked perfectly for 2 of the 3 blades but I had to borrow a more powerful version from a neighbor for that last one. I used anti-seize on the bolts when I put it back together so this one might work fine , next time. Overall, I recommend spending a little more for a more powerful brand.

If you are a professional needing it every day I suspect it is a bit light, but if you are a DYIer then it does a very good job of driving long screws and such like for a deck. It is light weight so easy to handle. It makes quick work of those long screws.

This impact driver comes with a battery, Charger and the driver itself. Comes with one Screw driver bit, . A Phillips head and a regular screw driver bit head. It has a place on the drill to store it, and the manual. The battery attaches easily to the bottom of the driver and it is easy to take off to charge. It has good power behind it for being battery operated. The only thing that I don't like about this impact driver is that from the top of the drill to the bottom it is straight and if you want to put a screw in at a certain angle it is hard to do. If the handle was on a little angel it would work a lot better as fat as I am concerned. If you are looking for something that is easy to use and don't have certain angles this would be the impact driver to buy.

The Hyper Tough Cordless Impact Driver has been a great addition to my household tools. I am impressed with how powerful it is. It worked great when removing old rusty screws from a plant box that had been attached to my deck. Honestly, I thought that it was going to be quite the task but it removed the screws quickly and easily. Another nice feature is the light that is located on the front, it is very bright and helpful when using it in a darkened area. The battery is long lasting. The battery is easily removeable and it doesn't take very long to get a full battery charge. It is light weight and fits in spaces that are small and hard to reach. I also like how quickly the screw tip can be removed and changed. I love the quick release. The quick trigger feature is also nice, there is very little effort needed to start it. The rubber grip is very helpful, it stays securely in your hand and there is no slipping. There were a couple of minor things that I did not like about it. The stickers on it started peeling off almost immediately which created a sticky mess due to the adhesive used to put them on. Also, it only came with one Philips head screw tip. In my opinion, there should have been either another flat head screw tip or a double ended screw tip. The button that is used to change screw directions is a little sticky but not horribly bad, it's almost like it gets stuck and you have to jiggle it around a bit. If you are looking for an inexpensive power drill/screwdriver this does the job.