Hyper Tough Brake Bleeder Kit with Magnetic Mount, Part 4006

Product is exactly what I ordered

excellent quality little brake bleeder. works well without getting brake fluid everywhere when bleeding brakes. I highly recommend this item or similar for a better and safer way to bleed brakes. and by safer I clearly mean - break fluid is toxic to the environment and wildlife and us the dumb ones.

It works but you gotta mess with it to fit your caliper bleeder. Honestly I would just watch a YouTube video on how to make one out of a bottle. Those work way better.

As someone who is not really a mechanic, I found this product and its simple instructions workable. The mounting magnet is a nice touch; I suspect most of my troubles stemmed from being a senior citizen and the miserable heat and humidity where I live. Didn't fix the problem, but it helped me run it down for the professional...

product works but the fittings that come with it are basically useless. This does not act like a one way valve it just keeps bubbles from pulling back because of the oil in the small container. you could actually do the same thing if you have a cup. I recommend purchasing a one way valve instead of getting this one if your doing it by yourself.

I honestly could not believe how small this kit was, especially the bottle. This is meant for one person brake bleeding but as anyone who has done this will know you still end up with fluid from the reservoir going into the bottle so I would imagine this would fill very quickly. it does come with all the bits to bleed brakes but with the small bottle and very short lengths of tubing you might find it a little tight to work on the vehicle. but I will say it comes with bits to both bleed brake calipers, cylinders and master cylinders. It does also come with a small magnet to hold the bottle near the area being bled but it is a small magnet. I have not tried using this item as I do have some reservations with the size of it all but if you are willing to give it a try them I imagine its worth a chance.

The bottle is too small and can make a mess. The tubing barely fit and tends to slip off. If you are fully bleeding the lines, you will make about 4 or 5 trips to the canister per wheel to properly bleed. It's true that you should be checking the reservoir to make sure it's full at all times, but a person with the know how and attention needed to do the job properly would only find this kit increasing the amount of time of the job. In the end, I did get it to work, but I would look for something different and save yourself the time and headache. Overall cheap quality.

didn't fit my car when it said it would. also the bottle is way too small, can't do a full brake bleed on all four wheels with this. I made my own brake bleeder with a plastic bottle and a silicone hose.

The one man brake bleeder is just barely good enough for motorcycle maintenance. The provided friction fit inserts did not stay connected and forced me to use 1 hand to hold it in place so it would not pop off when I pressurized the line. I ended up needing to tighten the bleeder valve because air kept entering the line when I released the brake. The bottle is undersized for anything bigger than a small motorcycle where bleeding the brake can actually be performed with this product by one person. 2 points for quality tubing and a great idea of mounting the bottle on a magnet to keep it from tipping over. This product should not be used on a car by 1 person.

I ordered with shipping vice delivery because shipping usually goes to the correct address but it was delivered by the company and as always (5th time this has happened) my item was delivered to the wrong address. I even addressed detailed instructions for identifying my house and they still can't get it right. Walmart is a waste of money. The pictures below show how incompetent this company is. The delivery picture is not my house.