Pool Skimmer Net, Heavy Duty Leaf Rake Cleaning Tool, Fine Mesh Net Bag Catcher

Works great. Good fit on my extension pole. Seem really sturdy. Good for scooping leaves off the bottom.

This seems to be a better net material and is finer than my previous one, works great. The only thing that I have noticed is with it all being made of plastic, it is a bit harder to make it go down to the bottom of the pool to get debris out, but with that extra slant at the end of the netting, that is helpful in getting the bottom debris into the netting.

Overall this is a nice leaf net. There's a few things to know about it. When attaching the connector and net, it will appear that they don't fit together. The ends are threaded (took me a minute to realize that) I question if the netting will hold up beyond a season as it appears to be heated and or glued to the net frame. Lastly the connector pins that should lock the net into the pole are not stiff and don't fully connect as I would want. They do work hence why I'm calling this a leaf net not a leaf rake. With that said it could be my pole and not the net itself. For me, it will work as I won't be using it to scoop large heavy quantities of leaves out of the pool.

This net may be good for leaves, but we were looking for a replacement net with a very fine mesh that would pick up the no-see-ems we get here in Florida. These little bugs just pass right thru the fabric of this net. I don't recommend it if you already have a pool cage that keeps leaves out of your pool.

Looks like a great net but it didn't fit either of my standard poles. The large buttons were too big for the holes and the small buttons were too short to stick out. We do a lot of netting without the poles while we're in the water; so that's what we will use this for. Still a great net, just didn't work with our poles.

While this "leaf grabber" has lots of room to collect leaves and debris out of the pool, and the delivery was very fast, attaching this grabber to my pole took some hacksawing and drilling and grinding. While it came with several options, to attach to some sort of pole you already own, none of the ways to attach worked on a WALMART extension pole. So get ready to "modify" either your pole or the grabber which requires a drill to "open" up the existing holes larger (or move the hole location completely) and to cut with a hacksaw the length of one of the receivers so it can attach to the pole. The grabber itself is nicely made and works well, but your gunna need some modifications, unless you feel lucky!

I was not happy with the quality of this net compared to some of my other ones - the glue or heat transfer job attaching it to the green plastic was extremely sloppy, with areas that already are showing gaps %26 slightly coming away from the plastic (see photos). In other areas, excess net was left and not trimmed away. After some uses, these areas will definitely develop holes. Also check dimensions - this net is smaller than most of my other ones. The "mouth" area in the net for catching debris is approximately 15.5" x 7".

it is cheap plastic, doesn't fit solidly onto pole and is so light its hard to get to the bottom. Once on the bottom it doesn't pick up/scoop the debris. Big Mistake

Should be a 0 Net has a hole in it

net was torn and pole is too small and light.