Slime 10003 Tube Sealant

If this product used correctly it works amazing with room for error! I received this product for free to rate and review. However I have used the product many times over. When you pump in product and after putting air in the tire make sure to spin the wheel for a while! The more you spin the better it workes!!

it certainly work's as described, but i do have issues now when i go to check the tire pressure or add air to the tire. it wont read the air pressure until i start the pump and then it shuts off almost immediately showing a reading of over 100 psi before dropping down below where i keep my tires filled. certainly stops leaks, ill give i that

Easy to use, Famous product. Works perfectly on slow leaks (e-bike tires) and has maintained full pressure for several months now. Valve core removal tool is plastic (in the product cap) and usually won't hold up for a second use…so I bought a steel valve core removal tool at auto parts store for $3…Manufacturer claims product works for 2 years..don't doubt that but probably will replace the tube long before that..

My Bicycle Had a Few Thorns in The Tire And went Flat , After Pulling out the Thorns out of the Tire Then Filled the Tire with Portion of the Bottle And spun the Tire a few time , and filled The Tire with Air And Spun The Wheel. Filled the Tire with The right Amount of air Pressure. It has Been 3 Days without. Air Leaks

Get something better. does not work.eats away old brass valve stems that are glued in the tube. not sure about newer tubes. Do not park with valve stem on the bottom of the tire or it will eventually fail. check out the picture of old tube, i never seen one like it. This stuff failed me and a freind. 2 strikes. not recommending slimey products. waste of time and money. you only need to find out Once.

You put it in the tube and its supposed to lessen the chance of having flats. It's a preventative measure, so I can't truly tell you if it's working or i'm just not hitting sharp obstacles.

And I don't have it. I am going to have to get someone to help me, because neither my teen son nor I could figure out how to get to step 2 on the directions. I guess there is a stem in the valve of a bike tire that has to be removed with the tool on the lid of this product. Try as I may, I could not remove it, and neither could my son. It seemed like we were going to break the tool on the cap or at least strip it, so I gave up. I will watch a youtube video later to show me how, but as a single mom with no knowledge beyond how to pump up a tire..this was frustrating. I'm sure the product works well, I have had my bike tires slimed before, but never have I done it myself.

Used it on my new electric scooter with seat and 14" tires. I'll admit that I had to 'guestimate' the amount used as measuring the small amount is/was impossible. First two days of use had no issue...scooter sat for 3 days while I was out of town. When I rode the scooter it felt funny and not as stable. What had happened was all the Slime ran down to the lowest part of the tire and caused a unbalance. After running for a while it all leveled out again. However, I can not recommend this for smaller tires like scooters and electric bikes.

Could not get slime into tire. Terrible instructions. Step 2 picture 2. Unclear if I should turn valve clockwise or counterclockwise. Arrow is an optical illusion that could mean either way. Tried both. Neither worked. I can't open the tire valve. I suggest whoever wrote these instructions take a slime enema. So aggrevated. I need to repair this tire.

This slime was ordered with Prevagen that was on sale for $62.?? Walmart said the prevagen was out of stock. when they sent it a day or 2 later they charge me $$72.?? not the sale price. I ordered it because it was on sale. Not a good look for Walmart.. Walmart has cancelled most of my orders because they did not have what was said to be "available" on the website.