Hyper Tough 20" Push Mower with 125cc Briggs and Stratton Engine

My son took it out of the box, fixed the handle, put oil then put gas and set the deck height. It started up after a few pulls and runs great. We had some tall grass in the hay field a little over a foot tall and it blazed right through it! He is impressed and for a 14 year old that is pretty good! We will get some use out of it when spring starts for sure!

Great for small to med. size yards. It came assembled, with oil. Just needed to roll it out of the box, lift up the handle, tighten of handle. I also checked the blade to make sure it was tight in place. Then add oil and gas. Started up on second pull. Perfect. My other Briggs and Stratton motor on prior mower still ran after 10 years. Perfect and American made engine. Body is light to handle. A bit lighter than prior 20 inch models, but ok and easy for me and my husband,it provides the power I need to complete the job Quick. I am in my 50's female. I absolutely recommend this mower.

My husband prides himself on keeping our lawn looking meticulous. He gets tons of compliments from our neighbors about how neatly he keeps our lawn looking. I got him this Hyper Tough 20” side discharge lawn mower. It took my husband less than 10 minutes to put this Hyper Tough lawn mower together right out of the box. All He needed to do was attach the handle to the base of the lawn mower. This Hyper Tough lawn mower allows you to adjust the height of the mower to get the preferred grass height cut. I was very pleased to see it came with a bottle of engine oil. The mower takes unleaded gasoline. To start the lawn mower, you have to push a button three times, hold the brake handle down, and then pull the starter handle until it starts. It started right up! It did an awesome job on the lawn. When my husband was done with the lawn it looked like a fine laid carpet! My husband was rather pleased with the performance of this Hyper Tough lawn mower. It did a nice job sharply cutting the grass blades down for us. This is definitely a great addition to my husband's lawn care equipment!

The Hyper Tough 20" Gas Powered Push Lawn Mower is a lightweight, fuel efficient little mowing machine that's perfect for small to medium sized yards. It's easy to assemble, easy to start - thanks a Prime 'N Pull easy start system - and even easier to operate. The classic cherry red exterior contains a Briggs & Stratton 125cc engine for extra pushing power up and downhill. Meanwhile, the easy grip handle offers added stability and maneuverability for a smooth controlled glide resulting in a pretty even trim. I also like the side discharge feature, which automatically moves grass clippings out of your path, making it easier to get the job done without tripping over your own feet while you walk. All in all, it's a nice little lawn mower!

The assembly for this mower was as simple as pulling it out of the box, lifting the handle straight, and tightening two knobs (nuts inside) to hold the handle straight - total of maybe five minutes. There is engine oil included in the box, just pour it in, put it gasoline (DON'T MIX OIL WITH IT!!!) and you're good to go. I love the little "primer" bulb that helps start the engine - no 100 pulls and no start with this! There's not a whole lot of grass growing in my area at the end of November, but it did cut the leaves nicely (not a mulcher by any means). The mower is pretty powerful - it's advertised for "small and medium" lawns and it seems to fill that niche nicely. It's also fairly light to maneuver around my yard. The different height settings are nice, but they are a little tough to set. I will say, these small engines don't operate well using gasoline with Ethanol in it - especially the higher ethanol winter-mix (the manual says nothing over 15% ethanol). Try to find a station that sells plain gasoline - your engine will last a lot longer.

The Hyper Tough 20 inch side discharge lawn mower is packaged for easy,fast assembly.Self contained,no extra parts to install,just raise the wheels,handles,tighten a couple of screw knobs,and that's that.The Hyper Tough even comes with a 15 ounce bottle of oil to get you going,but you will need gas ,and 87 minimum octane is recommended.When adding oil,there is a path to accommodate a long necked funnel,otherwise a small funnel will work with extra care to avoid spilling.The quick start guide allows for fast set-up from assembly to starting the 125 cc Briggs and Stratton engine.The side discharge chute allows for the grass clipping to be evenly distributed as you mow along.The rear,hard rubber flap(pull it down into position before starting the motor) prevents debris from exiting the rear.The easy start engine will be a pleasure come spring,after the assembly,and adding oil,and gas,I was able to start it with minimal difficulty,considering,the temperature was under 30 degrees F,and following an unseasonably,early Arctic cold spell.First it rained,and that froze,and then it snowed,leaving the ground frozen for the season.I'm looking forward to the next lawn maintenance season,so,I can actually use the Hyper Tough light weight,20 inch,side discharge lawn mower,now that it has been winterized for the early winter here in the Midwest.

This is still in the box (which is damaged and caved in)... the lanw mower is dented and scratched. I am wanting to return this but the package is heavy and I cant get any help finding out how to return this. I am very disappointed that this is damaged and was still delivered...and has now left me with the problem and hassle of returning it.

Thought it was ok but I have only mowed two or three times with it and there is a problem with the starter rope. It locks up so I can't pull it. I don't understand because sometimes the starter rope seems too long. I will have to find someone who knows about mowers to take a look and determine the problem.

It is your basic cheap lawnmower with a couple of exceptions: The wobbly plastic tires are a minor complaint. Someone when to great engineering efforts to make sure that you can never replace the blade. Even universal replacements are prevented from fitting by the Hyper Tough proprietary screw-you keyed blade. I would be like OK I surrender. All replacement blades have to be bought from you. Except, the ones at Walmart don't fit it either. I guess I will have to return it because it needs a new blade.

Cannot get a replacement blade. Arrived wouldn't start, had to adjust the spark plug. Starts easy, runs good. But what good is it without a blade. Tried to order but says not in stock. Should be able to order from company but impossible to find the company. Can't use a stock blade because with this blade all holes are oval. I WOULD RECOMMENT THAT NO ONE BUY THIS MOWER. Wasted $150 to mow 5 times.