Minwax Indoor/Outdoor Helmsman Spar Urethane, Semi-Gloss, Clear, 1 Quart

I am very happy with the outcome of this finish. I put 3 light coats on an antique dresser that I plan on using as a sink base. I did a light sand between coats and the 3rd coat totally changed the look becoming quite glossy. I believe it will be great for repelling water. The only thing to keep in mind is that the color is not clear, perhaps a bit orange. I did the work outside as it does have some fumes.

Used for a outdoor art display and worked great, only needed two coats and it dried super quickly. if applying liberally be aware if there is drippage that can go under piece that it is clean quickly.

6 hours is the minimum drying time for sanding/recoating. I counsel patience. 12 - 24 hours is what I have always followed and never had a problem. I usually apply 5 coats (which may be extreme). The final finish is spectacular, especially after curing for a minimum of 48 hours. If you're in a hurry and don't have the luxury of time use the Minwax water-based varnish. I'm an ol' guy have used spar varnish for the past 30 years and it's never let me down..

Done a great job. My door is nice and shiny and was easy to apply.

Great stuff

I stained and coated 2x a 12" piece of oak, which I left outside and totally exposed for a whole year in Massachusetts. Snow fell on it, UV hit it directly. I covered half of it with opaque tape first … and after the year was over, washed it and removed the tape. There were *absolutely* no signs of aging, cracking, nothing. Couldn't tell which side had been protected. In my book, that is a A+.

If you review, I did not receive the item as of today and have requested cancellation of the order.

Product is excellent. The delivery was from two states away which caused multiple delays.

have used often for outside wood fixtures,provides good coverage

We couldn't get the lid off without tearing up the lid.